Sabre 35 he plume kit question

[William Watson]

Hi, Wonder if somebody could advise on a plume kit for my Sabre 35he combie installed in it's 2008. It's in my outhouse 90 degree bend & goes out through the wall. The gases scoot straight out & my neighbour is now complaining that it's killing her plants , ( it used to be a lane lorries used to get into a yard but now has become a part of her garden, nowhere near her house maybe 50 mtrs.) Anyway can I fit a plume kit to take the exhaust gases straight up, it would need to be approximately 1mtr with maybe 45 degree bend on end. I cant seem to find a kit for the sabre 35, is there a universal kit I could use? TIA.

 

[Jajodu]

How is it killing her plants?

 

[Madrab]

Ideally you'll need a GSR to fit and test but the Sabre's are rebadged Vokeras, so if you're real lucky you may be able to find one from some old stock for it. It's done well if it's still chugging along.

 

[vulcancontinental]

You've probably got the older metal flue but the add-ons I believe should still work. Vokera part 20142842 plume kit or 20142841 45 degree plume diverter.

Tell her the flue consists of CO2 that plants convert to O2 and H2O which plants need to survive. The condensate is slightly acidic so suggest she puts plants in that like that.

 

[William Watson]

How is it killing her plants?

God knows as vulcancontinent al says most plants like it

 

[William Watson]

Ideally you'll need a GSR to fit and test but the Sabre's are rebadged Vokeras, so if you're real lucky you may be able to find one from some old stock for it. It's done well if it's still chugging along.

Thanks I'll have a look around see what I can dig up.

 

[William Watson]

You've probably got the older metal flue but the add-ons I believe should still work. Vokera part 20142842 plume kit or 20142841 45 degree plume diverter.

Tell her the flue consists of CO2 that plants convert to O2 and H2O which plants need to survive. The condensate is slightly acidic so suggest she puts plants in that like that.

Thanks, if I measure the plastic end where the plume comes out could I go by that when buying the plume kit.