Hi. I'm about to start building a power rack that was inspired by this design:
But I need to use it in the back garden since there's no room in the house. This is my design to make it as cheap as possible:
Any feedback on weak points would be appreciated.
The timber is from here:
http://www.diyclick2buy.com/category/construction/structural-timber/
I'm going for the 4x2 planks, is this suitable for this project? what can I apply to it to protect it from rain and moisture?
Total cost of timber has come up to £59.84
Brackets from Ebay listing £16.50
Steel tube for pull ups and safety arms (not shown) from this Ebayer £32
Cheers
But I need to use it in the back garden since there's no room in the house. This is my design to make it as cheap as possible:
Any feedback on weak points would be appreciated.
The timber is from here:
http://www.diyclick2buy.com/category/construction/structural-timber/
I'm going for the 4x2 planks, is this suitable for this project? what can I apply to it to protect it from rain and moisture?
Total cost of timber has come up to £59.84
Brackets from Ebay listing £16.50
Steel tube for pull ups and safety arms (not shown) from this Ebayer £32
Cheers
Links in this post may contain affiliate links for which DIYnot may be compensated.