Recent content by AllyDK

Quick update in case anyone should read this post later. There were L brackets above the dishwasher going into the side of the full height oven housing, therefore we did have to remove the dishwasher to get the worktop off. It was not attached to the back wall or to the right in the unit with...

SOLVED - other half came home from work and with some extra muscle we were able to yank the worktop up and off the carcass. Small damage to the 1.5cm piece at the front but we will just replace that. Happy days

Edited original post to confirm that the worktop is glued down, silicone is just over the cut edge - to seal it presumably.

Hi all I need to remove a laminate worktop and have discovered that underneath my hob, the worktop has been glued to the carcass frame. The worktop has also had silicone applied to the cut edge. To make the hob cutout, a 1.5cm strip was left at the front edge and the sides were cut completely...

Cool. That I can manage to do

Is the grey piece in that image the bracing bar? What is it made of? When they come to template I'm sure they'll tell me what bracing and battens I need but at least I know what sorts of things to check. I can move the door panel no problem

Thanks for your help. I was hoping there might be a way so that I could get away with not removing the dishwasher but never mind

Hi, I need to remove my laminate kitchen worktops in preparation for quartz worktop templating. I have an integrated dishwasher in a base unit next to my sink cupboard. To the other side of the dishwasher is a full height unit with my oven. I can see under the worktop at the front of the...