Recent content by RobTi

Any help on how to proceed with this please ? Sorted went in via wintex and then selected keypad and put the code in and it reported the update so clicked yes and it installed, yet I tried this via the actual keypad and got no notification Thanks for the help

Yes no change tonight

Alarm works fine just lost on what to do now, tried wintex and also logging in and out at the keypad

Updated my firmware yesterday and just checked and it has the following with the timer icon continuously spinning, any help on this please ?

Thanks all I went for the hanging rail today all fixed ready for the units, ever second hole hit mortar which cause problems but got enough screws to overcome that Thanks

Would this work if I am in the mortar rather than the brick?

Just wondering if it would work out dropping or raising the cabinets by 50mm to catch the centre of the brick instead of the mortar

Think the wall is shot I must have hit mortar, pulled the no.8 plug out and tried a no.10 and it still spins, years ago I would have taken the cabinets down and used a wooden dook

It’s an ex council house and half of the houses were stripped and re plastered but the other half were just strapped and sheeted many years 25+

Fills ?

Have a brick wall that has been strapped and sheeted many years back as the houses were affected by damp. So trying to fit a kitchen wall unit and used a 8mm plug and 100x6 screw and a couple are turning in the hole. Advice please?

Many thanks to @secureiam for the help and explaining my setup and settings to me, all sorted now and working fine. Thanks

Looks like I will need to ask the installer although I like to solve things myself by asking on the forums. ATM I can save an area but if I draw another and hit save the first one disappears

Hi new darkfighter and colorvue cameras and when I try to add more than one masked area I lose the first one, does this sound correct?

Hi letting wind in at seal on hinge side and handle won’t fully turn to lock position, anything I can try?