vtyr's latest activity
-
I wouldn't worry about it. -
I’ve just had a bunch of 100mm Ecotherm PIR delivered which has a bit of shrinkage on the corners and long edges, few plasterboard...
-
-
vtyr replied to the thread Converting detached garage/workshop.So I think I'm going to go with either of these two options, and whilst PIR doesn't necessarily(?) need a DPM, I'm wanting to be on the...
-
-
yes as far as i know 'i did ask him some months later iff he was happy with it and him being a grumpy sod if things go wrong he would...
-
vtyr replied to the thread Converting detached garage/workshop.Interesting, was it warm though? I'm only looking for thermal efficiency here, as the building is block and brick cavity.
-
Bulky = cheap. Slimline = expensive. I'd probably look at trapping 25mm PIR against the wall using 25mm x 50mm roofing battens, screwed...
-
vtyr replied to the thread Converting detached garage/workshop.Thanks. Would you be able to let me know the most affordable (slimline under 100mm) wall make up that sits within renovation building...
-
We tend to trap say 50mm PIR against the wall with a slim stud i.e. 50mm x 50mm, so that the insulation is continuous and the studs are...
-
vtyr replied to the thread Converting detached garage/workshop.The whole "acoustic/sound" thing has been puzzling me. Most of the Rockwool stuff appears to be marketed as such, yet produces 0.034W/mK...
-
Hello! Long time lurker here. I'm currently planning to convert my external workshop (approx 60sqm) to WFH offices. At the moment, it's...
