Fluidmaster washer
- Thread starter Fredstudio
- Start date
Sponsored Links
Normally it is just grit under the washer.
Andy
Andy
Thanks yes it overflowing
Sponsored Links
Do you twist and pull the top cap to remove it?
Turn off the water supply first, then lift the arm and turn 90 degrees and the top will come off.
Andy
Andy
Thanks the arm of the full valve seems abit different metal extending to the float.
Just replace the top part?
Cause it telescopic you can split the valve and replace the top part
Yes. Turn off water. Lift the locking ring on the stem of the valve. Pull the valve upwards. Replace with new part.
There is a little spring clip which can slide up the metal rod to adjust the height of the float. On later ones it was replaced by a plastic screw adjuster.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
