3 phase

Hi I have a site currently without power, had the distribution company visit and they can run in either a single phase or 3 phase supply. if I went with the 3 phase supply, then to a 3 phase meter and then to a board that would split the 3 phase to 3 separate single phases, one for each...

Hi, My property has a 3-phase CU and my new range cooker appears to offer the option of being wired as single or 3-phase (connection diagram attached). The electricians have installed two cables aiming to share the load for a single phase appliance (they didn't know the cooker would be capable...

We're in the early stages of a self-build. We plan a 3ph connection, which will have to be to a Boundary Box at 35m from the base of the pole. This is still some way from the house, probably around 50m. Is this a concern? There is a closer pole that is probably shortens the distance between the...

Hi all, I am currently in the process of building a self build and have a few questions about the distribution of power. I am not an electrician but do have a basic understanding of electrics. Also to confirm I will not be fitting this as I will be employing a qualified electrician when the...

Right, I would like to preface this with the fact that I am NOT a qualified electrician, and as such I will NOT be touching any of this myself. I'm already leaning towards telling them to get a qualified electrician to check their installation, although they supposedly had an inspection 2 years...

Want to put meter between three phase box and new metered supply. Spark saying just use one of phases to new box with meter between. Is this correct?

Regards: Elliott.

We have a house on three phases, the main house on phase one and the guest house on phase two. TP Link socket adapters are used to send ethernet from the upstairs router to the ground floor. In order to get a data connection to the guest house we can fit two single sockets in the meter...