beading

Hi, Can anyone recommend a good tool for removing Rehau beading? I have seen a number of examples with people using all manner of different tools but the gap between the beading and frame is so small, I was beginning to think they it was all one piece!! I have one of these which some people...

Hi, We’ve just had a new kitchen installed, but aren’t sure the best route forward in terms of beading. This has been our first project so we have unfortunately learnt a lot of things too late. We ended up getting the flooring (laminate) put in after the kitchen was fitted, but the fitter has...

I'd like to put a catflap into a tall, narrow double-glazed window (300mm x 1800mm), but the window isn't wide enough for a new glass panel with circular cutout for cat flap adapter. The next best solution would be to divide the window into 2 panels. a 300mm x 300mm infill panel at the bottom...

I have replaced quite a few of my misted sealed units over the past year or two but one or two of the beads could do with replacing as well. I have sourced some of the correct beading - it’s internal, rounded beading for Rehau frames. I’d originally thought cutting the 45 degree ends would...

I have some floor trim/beading to go around my new laminate floor, but I'm struggling to get a nice 45° degree angle. I have a mitre saw which has 45° setting but the trim is not flat so I can't get the angle to be flush. Skotia edge by barnsley7 posted 8 Dec 2019 at 3:18 PM Skotia trim by...

Hi, I am trying to remove a broken glass panel in a upvc door. I researched from other posters and purchased a chisel knife and a mallet. Trying to get under the beading is making a mess of the beading. IMG_20190930_121857_compress65 by Jenson7 posted 30 Sep 2019 at 3:54 PM Here are photos...

When you bead a single pane window from the outside, do you bead tight to the glass or do you leave a gap and fill will putty?

Hiya, I had to use extreme prejudice to remove a bead from a window and left a bunch of unsightly gouges in it, so - if possible - I'd like to replace it. The bead itself has a time and date stamped in it, as well as "6036717 PLASTMO UK BS7413 2002" which I assume is the model number...

hey, So the heat has hit my front door and the beadings popped out. It wouldn't go back in so I stupidly cut it down to size and now it just falls out. I tried to identify the door, frame, locks etc but couldn't find anything about the door itself. The locks are FUHR, the hinges trojan but...

Hi everyone, Working on a property (listed council block) which has single glazed upvc windows in some rooms and double glazed in others. Identical windows just the beaiding is wider. Could i get replacement beading for the single unit? Thanks for the help

Hi All, I am hoping that somebody may be able to identify the UPVC window beading and provide me with the make/model and even a supplier as I have acquired some decent frames from my neighbour but the installers of their new units forgot to save all the beading for me. Any help would be greatly...

Just had a new stylish oak front door fitted and the beading for the windows is on the outside. Is this right as it seems a bit odd despite the supplier saying it is ok and that it has been fitted correctly. Door also has "face" stickers on the outside of the glass. See pictures below...