brackets

I need to put up 3 curtain brackets (Left, Right, Centre) above a floor to ceiling new build window. Unfortunately previous owner drilled pretty big holes using Redidrive screws. The holes must have widened over time and I also want to use different brackets. The existing holes are about 8mm...

Hi all. I recently moved house and am trying to get the study sorted. I have mounted the wall rails for some shelves I had in my old house, but unfortunately most of the shelf brackets were lost during the move. I've bought a few others online that are the same length (170mm) but none of them...

Hello :) Sorry if this is a stupid question but I'm a DIY newbie: I'm replacing curtain pole brackets as our previous brackets have bent under the weight of the curtains. I've removed the old brackets - There weren't any plugs in the wall apart from one very large metal (potentially...

Any ideas 1) How these covers come off? There is a groove feature in the middle of the lower face, which might be relevant. 2) Where I can get some more of this style of cover? I want to add some more cabinets in the same style.

I need to hang a radiator (160cm wide, 50cm high, total weight around 35kg) via two brackets to a plasterboard wall. The wall is external, so that it has studs (about 12mm deep and 50mm wide) behind the plasterboard and then bricks behind the studs. I am lucky enough to have studs in...

Hi, I’ve recently bought a new build house. I’m looking to change a standard double panel 600mm x 600mm radiator to a vertical radiator which is 1800mm x 480 mm. The vertical radiator weighs around 45-50kg before water. I think the current one is probably only 20kg before water. The current...