carpet

Our door frames are about 135mm deep. We're having 35mm-depth doors fitted and we want the threshold to be hidden underneath the door. We currently have our finished wood floor running about 40/50mm into the doorframe (this is screwed down into place, not glued), and we're having our carpet...

Hi, In my home we have Amtico tiles on the ground floor and in all bathrooms. Now I'd like to replace carpet firstly in the landing/corridor on the 1st floor. The thing is that under the carpet there is a foam: https://ibb.co/hf4nmtP all sitting on OSB or plywood. I'd like to avoid big gaps...

Hi all, I’m looking to get my carpets changed as cheaply as possible. This is purely because where I’m staying is a short term solution however the carpets desperately need to be changed because firstly they STINK and secondly it’s a very old fashioned and busy pattern. Anyway, my max budget is...

I want to repair an old creaky staircase for a friend on a small budget. it's an old house and taking out the existing staircase or treads are not an option. So can I just place a piece of hardwood or plywood straight on top of each existing tread. There will be a carpet going on top with...

My living room is on ground floor. It has a suspended wooden floor over a large vented cavity (several feet deep). It gets pretty cold in winter. I want to get carpet in this room; both for comfort and to increase the warmth/insulation in the colder months. I’m aware that doing under-floor...

Hi, I’ve got this really small utility room I’m building a diy riser in, to raise the washing machine up a little. The room has recently been carpeted and I’ve read online about being careful or cautious in case of any possible unforeseen leaks from the machine. The carpet is underlaid and all...

I've got a room which is being fitted with a 10mm underlay and carpet by a fitter this week. From fitting laminate flooring elsewhere in the house, I purchased a polythene vapour barrier from Wickes and have plenty left over. The carpet is being fitted in a room that is naturally pretty cold...

Hi all, We are trying to find a threshold door bar that goes from laminate to carpet. The problem I seem to be having is which strip to use. The laminate is 10mm thick and the underlay for the laminate is 5mm thick. The carpet I was planning on getting is 20mm thick. I have tried searching for...

I am working on my first DIY project to replace carpet with laminate flooring in a first-floor room in a victorian terrace house. I have removed the carpet and the underlay. 1) There are many nails and staples on the wooden subfloor, should I remove them all? 2) Is there anything I should do...

We are about to order some underlay to go with a new Seattle Lavastone carpet in a bedroom. The carpet is 16mm Saxony pile with an Action Hessian backing. Is Cloud 9 Cirrus 9mm thick underlay suitable? Tredaire has a similar spec but I can get the Cloud 9 cheaper. Is it ok to lay the underlay...

Not long before we have a carpet fitted (with underlay) in our front bedroom once plastering and decorating completed - normal floorboards with a small void (where you can see some dust, debris and wiring) between this room and the lounge underneath. Does anyone know if you need to 'fill' gaps...

I have wooden floorboards that are getting a bit too squeaky. so I am going to lift the carpet. I hope it wont be too trixy The thresholds look like the images below. But I'm not totally sure the best way to lift them as they look flimsy and not sure how they are attached so don't know how to...

A few years ago we sanded part of a ceiling not realising until recently that it contains asbestos. We're planning on redecorating the room the ceiling was sanded in and want to remove the carpet, I'm just concerned about the amount of asbestos dust that's settled in it from our past mistake. I...

Hi everyone, I’m attempting to fit a new carpet into a bedroom. First time I’ve tackled a full room, but it’s 2.8x3.6 box so should be as easy as they come. However... I can’t get the carpet to grip to the grippers! Some info: I’ve put grippers round the skirting with a 6mm gap (seemed to be...

Hi, I`m after around 80smq of engineering wood floor and some piece of carpet. I`m based in Essex. Do anyone have some advise on a good website or physical shop for good and reasonable price?

Hello, Has anyone got any instructions/tips/advice on sewing carpet for a bullnose step? Or whether it’s really that much better than using the Cap-Band Method? Cheers!

Hello, I have had some carpets (and underlay) installed. However the carpet to carpet threshold bars the fitters used give some pretty steep “ramping”. So much so it gives quite a noticeable “trough” at the door thresholds even though the underlay is cutback underneath. Therefore has anyone...

We've had a stair runner, Wool Loop carpet installed. They Whipped the edges so it doesn't fray, however at the bottom of the stairs, where it meets the tiled floor, they have left it cut. As you can see from the photos, it isn't a neat cut and as it isn't finished it will slowly fray, small...

We live in a rented flat and have recently started having problems with carpet moths in one of the rooms. There is 100% fitted wool carpet everywhere, so perfect for them. When trying to find the nest we noticed what looked like rice grains near the fitted/built-in cupboard/dresser and pulled up...

Hi all So ive done loads of research after discovering I could have asbestos tiles under our carpet throughout downstairs. We are awaiting test results. At this point I'm not naive about it nor fearful of it. Ive decided if its confirmed as asbestos that Ill encapsulate it and be done with it...