channel

What's the best way to fit channel drain around corners? I don't know if the corner boxes need to line up with specific parts of the channel drain or whether any cut will fit into the box. My lengths will almost certainly be random and there is a few corners to work out

I need to fit channel drain to a clay gully. I'm going need to join into the side. I think I will cut a 70mm hole with a glass cutter and fit a 68mm pipe in the side like someone else has done on this forum. The problem I have is that I can't find any channel drain with a 70mm outlet, they're...

We are having to cut out channels in our existing kitchen floor slab for a new kitchen island. I will need to place an electric feed for the sockets; cold feed, hot feed and a gas pipe. I will also have to re-do some drainage so will dig out for that and re-cover. So I guess I'm keen on...

I’m looking to install 3m of channel drainage to pick up the rainwater from a new pitched roof and take to an existing gulley. I’ve got a 9 inch grinder to cut concrete, looking for advice on how far to dig down and if I have to put a concrete bed below the channel? I’m not a plumber but not...

Hi all, I have pipework mounted on top of paramount partition board and want to hide this pipework inside the partition. I'm thinking of drilling access holes at each end, and feed through speedfit. What's the best technique for creating the channel internally between the two holes, cutting...

Pyronix Enforcer V10 - "Wireless Ch To" entry in the Panel log at almost the same time each day for the past two weeks. From research I think it is seeing some 'jamming' or interference and hopping channels. Is this understanding correct? Is something wrong with the installation? Can it...