cls

Gluing & screwing ply sheets down to CLS, Toolstation has some cheap (cheaper than Egger) D4, but 10 minutes? Is there a good slower option?

The ply substrate is for a click vinyl surface. the cls frame will be sat on rubber pads or low level decking pedestals on rubber pads (on a membrane) I was thinking of using a stud type support framework so that ply edges have landings along their full length? So does the usual 400mm joist...

Talking to a general builder doing some dry lining in my place, says he mostly does bathrooms these days, because "everything has dropped and needs reworking". Is tilebackers/bath sat on the same horiz CLS/batten a good solution?

I treated the conc. base with sikka rapid dpm, then put membrane or damp course under the stud soles. I'll cover the whole base with a taped seam membrane anyway. I was thinking of masonry screwing a couple of treated 38x63 CLS down flat directly on the membrane at the base of the stud wall to...

The stay at home situation has made me think about sorting out a home office pretty sharpish, and I plan to finish an outbuilding conversion started by previous owners. They had trades in and got most of the way there apart from the ceiling. My plan is to keep things simple and frame across...

Ive just moved into a 12 year old home. It has roughly 200mm of insulation (2 sheets of 100mm), but suffers from the "modern house syndrome" of only having 38x75mm joists. This means my insulation sits very proud. I'm looking to board it out. Now, conscious that the existing joists aren't the...

Hi, I am constructing a 3m high stud wall where space is tight. Would it be better to use 45mmx45mm studding or to use CLS 38mm x 63mm studding turned "sideways"? (I am assuming that the CLS will be straighter/truer etc) If CLS "sideways" is an option, does that mean the sole/head plate will...