concrete floor shed

I'm building a 4.8m x 2.8m (ideally) garden room and need some advice on the base / subfloor and possibility of overhang on the floor joists. As you can see in the image, I've got a concrete slab (not insulated) that I was going to sit the 3x2 treated joists directly on with DPC underneath each...

Hi there, Firstly I'm new to this forum, so apologies if I've not posted in the correct place etc. Any advice on the following would be much appreciated: I'm building a garden office 4.8w x 2.4d x 2.5h. The concrete base is already done (about 80mm on top of hardcore, mot and dpm, no sand...

Hi guys, I'm taking down a concrete garage down its around 16 x 22 foot but I will be shortening it to 14 x 10 foot I'm ripping up the block paving and putting a 2 inch base of concrete down 6 inch bigger all the way round for it to sit on I'll re wacker the base and level it if required as it's...

I’ve reclaimed a concrete sectional garage, and plan to rebuild it as a shed. The shed dimensions are likely to be 3m by 6m. Each panel is 60cm wide by 1m high. So I’ll be using two panels to get to my full height of 2m. The shed is at the back of the garden, with only a narrow 80cm access...

Hi. I want to put some machinery inside a 12' x 10' wooden or metal shed. It's best I think to mount the machinery on a concrete floor rather than a wooden floor. Because I want to sound-proof the shed to minimise noise, and that's not really going to be possible if the machinery is standing...