cupboard doors

Hi all, So, I've decided to put a cupboard door under the stairs and reclad the walls/studs. I've used 12mm ply and I'm going to cover it with 21x4mm D stripwood à la baton wall. I had to use 12mm ply otherwise it would be thicker than the edge of the stairs with the stripwood. Anyway - I need...

Hi we've got a new door for our washing machine but now need to drill a new hinge hole. Bit nervous as don't want to go through the door. I've seen on a few posts Screwfix do a hinge cutter https://www.screwfix.com/p/erbauer-tct-hinge-cutter-35mm/4977v but I'm worried as it had no stopper...

Just in the process of buying a “new” house. House was built 10 yrs ago and kitchen replaced just over 6 months ago. It’s got built in fridge, built in freezer, built in oven, built in hob and even a built in microwave but no built in dishwasher. There is a cupboard, that I could remove...

As I moved all my services under the stair, I thought would be good to closed it down and have access with double door opening. This will allow to push is the washing machine as well and have access for boiler and cylinder maintenance. My idea is to frame off and board on both side having it...

The house renovations are ongoing...yesterday I removed a failing sliding door and glass brick combination and replaced with a couple of cheap ebay louvred doors. I built a frame out of stud work and used 65mm butt hinges. Everything is square and vertical, according to my spirit level, but...