doorbell

Outdoor doorbell-intercom unit lets the residents hear outside from their handset in the flat, but the visitor cannot hear any of them. Handset issues have been ruled out. The speaker was making a loud cracking sound prior to failing which I read is a sign of a speaker that's about to die. Can...

Hello, Any help appreciated. This is a new post on a different problem related to the adding of a mute switch (on/off switch) to an intercom phone inside an apartment. Photos are attached. Postmen keep ringing my doorbell from the street to deliver other people’s packages. There is no mute...

Hi, I'm trying to install a ring doorbell however my current button doorbell is positioned in a way that is to the side of my house (see attached pictures). As a complete DIY novice, would someone be willing to offer how you might go about relocating the wiring so that it sits flush with the...

I'm going to fit a Ring doorbell, so need to extend the doorbell button cable that has previously been cut. There isn't much currently available... I have tried pulling it to see if it will extend a bit, but it won't. What's the best solution please? 20210630_134615 by Techboy posted 30 Jun...

Hi, I'm in the process of building a garden office. As I'll be working from there during the day I'd like to extend the door bell into there wirelessly. Currently I have a Friedland door bell transformer (https://www.tlc-direct.co.uk/Products/VE753.html), conventional door bell switch and...

I recently installed a Google Nest doorbell along with a Surf 2 Note Door Chime and a 12V doorbell transformer from TLC, and noticed the Surf 2 Note Door Chime is very quite when rung. Yes, it is wired correctly and has the module installed inside the door bell that came with the Google Nest...

Hi just got the battery 2k Eufy and was hoping to wire it up using our existing doorbell wires,only problem is the transformer isn’t powerful enough its only 8V. IMG_20210209_155939.jpg706×941 22.1 KB IMG_20210209_155950.jpg650×867 54.3 KB Am i right in thinking i have 2 options...

Hi All! This may seem like an extremely stupid question but I wondered if you have any advice on how to get a doorbell chime/transformer casing cover off (picture attached). It looks like it should just pop off but it feels like I'm going to pull the entire unit off the wall before the casing...

Hello, I'm looking for advice on what is available. I'm looking for something that will allow to see who is at my front door when someone knocks on it. I currently do not have a doorbell, although there was one previously, or an alarm, or any kind of cctv. I tried the ring door cam and was...

Hello, I'm a newbie so hopefully posted in the correct place. I bought a ring pro doorbell which I knew needed hard wiring. I thought it would be as easy to replace my old one with the new one. It isn't. As I've suggested I currently have a wired in doorbell, 8v transformer outside of my CU...

Hi, I've just upgraded my Ring 2 doorbell to a powered Ring Pro doorbell. The problem I have is the power adaptor cable I bought is too short. I need to extend it but am not sure on what cable to use to extend it. I've gone to some local electrical suppliers, Homebase and a few other places...

Hi, I’ve just bought a electric servants bell from eBay that was sold as working and it appears to be, however when the bell is connected (at the bottom) and you press one of the bell push switches all the flags are moved. If you disconnect the bell the flags work independently to each bell...

Hi, I want to fit a new doorbell and plinth as the old one was shot/weathered to heck. Took the old bit of wood off, there are various screw holes filled with wood/plugs. The problem is only one matches up to the screw hole in the plinth - most of the diameter of the plinth where you could...

Hi all, I'm planning on buying the Ring Elite for my new front extension project. I already have Cat5e to the front for my existing CCTV camera with PoE, so two pairs already used up from this one cable. I'm hoping that the Ring Elite only needs two pairs too, so I can use the remaining two...

Hi, I am trying to disconnect my electric doorbell from the consumer unit. Can I pull out the fuse? I have tried after turning mains off) but it won't come out? (Pic attached) Any help appreciated thanks!

Hi all, long time listener, first time caller. I have a Friedland visiocam 46603pl, 2.4 ghz wireless monitor, ed1. \It has 2 units, the doorbell with the camera and the remote video screen which will show video of person who pressed on the doorbell for 30 seconds. I would like to tweak the...

Hi all, long time listener, first time caller. I have a Friedland visiocam 46603pl, 2.4 ghz wireless monitor, ed1. \It has 2 units, the doorbell with the camera and the remote video screen which will show video of person who pressed on the doorbell for 30 seconds. I would like to tweak the...

Hi all, long time listener, first time caller. I have a Friedland visiocam 46603pl, 2.4 ghz wireless monitor, ed1. \It has 2 units, the doorbell with the camera and the remote video screen which will show video of person who pressed on the doorbell for 30 seconds. I would like to tweak the...

I think this is for an old door bell. I was going to remove it but then noticed it seems to be wired into the plug below it. Is it just a case of unwiring it from the plug below? Thanks