element

My Oven element perished so I ordered a new one and fitted it but got confused with 2 wires. The black and white wire seen below. With the current connection when turned into fan oven the inner element heats up and glows red but if I swap the black and white connection around the outer...

Hi All, Ok so as most of you know by now parts are getting increasingly difficult to get and am in need of two Howden AA714 15" 3kW IMMERSION HEATER 20A @ 72°C – 16A @ 95°C – AA714 (2 1/4″ Thread) elements. The supplier (only one by the looks of things) has a lead time of up to 4 weeks and a...

Hi there I'm changing the element on a caple C2234 fan oven and stupidly forgot to take a photo of the element wires before disconnecting. If I was to incorrectly reconnect the new element with live and neutral the wrong way around, what would happen? Thanks a lot for your help!

hi I have a Creda 950DL 9.5kw shower, approximately 8 years old. About two years ago the medium element light went out and the water ran cold if I had it set to medium. For the past two years it’s only been working on one element, meaning I had to set it to high to get any hot water. Puzzlingly...

Hello all, my oven recently packed up and I went online to see what the issue could be. So I ordered a new replacement element after typing in my oven product Number. When the new element arrived it had a different connection my old one has 2 single spades and the new one has 2 double shades. I...

Hi, i am hoping someone can help. I tried taking a look at my Neff Oven Fan element ( Neff B1432N2GB/01) since the RCD kept tripping everytime it was switched on after about 30 seconds so I brought a new element. Now when taking the old one off I pulled too hard stupidly and now I’m not sure...

Hi. If anyone can help... My indicit tumble dryer wont dry the clothes as efficiently. It was a sudden change. I've tried getting rid of lint in the bit that catches it. Ives washed to filter at the bottom of tha machine that had a but of lint build up. The condenser is empty of water. The...

Model: 44441349 (Richmond 1100DFT) Can anyone please advise whether the job can be done from the front with the appliance in-situ or whether I need access from the rear of the appliance. Thank you.

Power lost all of a sudden the other day, seems it could be the cooker oven element as it's not heating the oven anymore, although at the time I wasn't sure what caused the power to be lost throughout the house, so when I checked the trip switch box I saw that all were on apart from the main...

Hi, A couple of days ago, I was using my CDA oven when the electricity tripped a couple of times. It was the oven that caused this as whilst it will switch on and the little pilot light shows, it no longer produces any heat. The grill still seems to be working though. The fan also appears to...

Hi, I've bought a house and been here a year now but the immersion heater is not working now. It randomly stopped one day so I bought a new element/stat and swapped them over. It's a basic cylinder with a single element entry at the top. I've replaced it of a similar element of the same size...

Hi, I recently bought two new identical oil filled radiators off ebay. Both of them dont seem to work correctly. They have three heat settings 850w, 1750w and 2600w ( 850w and 1750w combined). On the 850w setting the unit works fine, it heats up and responds to the dial thermostat and...

Hi there I have a Leisure electric cooker LEVC54W. After looking at various trouble shooting guides I decided the heating element in the bottom oven has gone. Unscrewed the panel inside the cooker to reveal the element and the fan but it looks like I have to access the element from the back...

Hi, A few weeks ago my Diplomat 3940 oven tripped the RCD, the oven came back on after I reset the RCD but fan element wasn't heating up. The oven still worked on every other function so I assumed the fan element had blown. I bought a replacement element and fitted it (the old one was visibly...