engineered wood flooring

Hi, We purchased a house recently and I'm am wondering what the previous owner did to the wood flooring and how best to make it look fresh again. It looks like engineered wood with a very thin hardwood layer (1mm maybe, see picture with the dent). Total thickness is 3cm, which I suspect was...

I am planning to have new engineered oak flooring installed throughout my duplex apartment in about 6 week's time, including the staircase and upstairs landing. I also just got approval for a loft conversion to go ahead. I'm worried that the new wood flooring would get damaged when doing the...

Hi all, We are laying an untreated engineered oak floor, and have chosen to use a hard-wax oil (by Blanchon) to finish it. The directions state it should be brush applied and then buffed in using white cotton cloth or a buffer/polisher with a beige pad.. I've borrowed a DA polisher with a 5"...

Hi I'm replacing the flooring on the ground floor of my house, with click and lock engineered flooring. I'll be laying it in the hallway, front room and dining room. The current click on lock flooring doesn't use any threshold strips between rooms and I'd like to replicate this. I'm not sure...

Hi I about to install engineered timber flooring and was wondering what happens at a step edge that we have which intersects the space in terms of expension. The flooring laid up to the edge will be about 3.5m wide and the edge is about 5m long. The flooring down the step will be tile. I was...

Hi all, I have just purchased a bungalow. It's in need of a full renovation but just doing the planning now. I am wanting to install word flooring (or LVT) throughout as I think it makes a place look bigger. I have seen some really lovely parquet LVT and engineered wood floors and wondering if...