fault

Hi all, the other day I noticed that our Honeywell ST6400C was showing a red light for “heating” but the heating slider switch has been set to “off” for the last couple of months. I cycled the heating slider switch across to “continuous” and back left to “off” and the red light went out. Any...

Hi guys, I was asked to pull a new lighting circuit (from an existing one) for a loft bedroom. I have taken supply from an adjacent light with the Live wire going into first 2way switch and neutral directly into the light. I have a problem where if the intermediate switch is operated the 2nd...

Anyone know what may be causing this fault and how to fix it? I have a Whirlpool Generation 2000+ G2P DWI Dishwasher that was in the house when we moved in in 2012 (i.e. Don't know how old it is), and it has recently started beeping at the end/mid way through the cycle and ends up on the rinse...

My Main Eco Elite 30 has recently started throwing a E133 error. If I reset the boiler it tends to start up again OK. I've noticed that sometimes it makes an explosion sound when igniting. The E133 is intermittent but tends to happen at least once a day. Any ideas on what the problem and...

Right so this is a long one so do bare with me ! Im not gas safe but i am a multiskilled engineer so have rough knowledge when it comes to heating and plumbing etc. So my radiator brackets was coming off my wall so today i valved off the rad and removed it from the wall and refixed the...

Had a short power cut earlier and when the power came back on, it looks like my Vaillant Ecotec 937 plus boiler died. My educated guess is either when the power went out or when the power came back on, the PCB on my boiler died, as now it is completely unresponsive (LCD dead, no heating or hot...

Anyone else having issues with Aqualisa customer service/ warranty repairs? I've always recommended Aqualisa as I've found their customer service to be excellent in the past, but it seems not any more. My elderly disabled customer's digital shower is on the blink and she's been told today it'll...

Hi, I have a SMEG dishwasher (DI612E) that is with the 5th led flashing all the time no matter what I do. I have checked the manual and searched around, but couldn't find anything saying about a situation where only the 5th led is flashing. Do you guys know what may be the issue and how to fix...

Hi all, woke up this morning to a buzzing and crackling sound coming from one of the sockets in my bedroom when I turned it on, which also caused the lights to flicker at the same time, what is the 2nd socket inline on the 20A radial socket circuit. Stuff was not working/powering up on this...

Hello all. Have inherited a rather old Spy system in our new house and managed to hack through a Viper window sensor cable while moving a cupboard. I’ve gel Clipped them together but the keypad is showing a fault (currently rt due to too many attempts at resetting it!). I have powered down the...

I have a problem with one of my new Hive Heating thermostatic radiator valves that I got last month, it has stopped responding to manual temperature changes via the valve it's self, but the valve still wakes up when you go to manually adjust it as shown in the video. Have I accidentally enabled...

Hi Everyone! I have a rather old integrated dishwasher, Whirlpool ADG 7470/2. As of recently it refuses to work, showing "6 flashes" error code. Perhaps local experts could help me figure out what is going on. Here is what I know so far: (1) "6 flashes" apparently means that the dishwasher...

Moved into my house December 2019 with a Biasi Riva Advance HE installed over 10 years ago (found out from their service line it's not under warranty). Had a couple of intermittent faults with it over the past 18 months but for the most part its been ok. New problem started this week - hot...

I have a 2yr old Ideal Logic C35 boiler which is losing pressure 5 to 6 times a day. To diagnose whether it was the boiler or system, I done the following: 1 At 1am when the boiler hadn't been used for over 2hrs, I put the pressure upto 2 bars. 2 I isolated the boiler by turning the CH flow and...

Hi Last night my keypad sounded (alarm off at the time) and it showed a fault of +RF Entrance Hall It emitted a tone a few times before I entered my code to see the fault. It did it again this morning. Cant find this fault code in the manual. I think it relates to the wireless door sensor I...

Hi, My Zanussi DWD 939 dishwasher's power button turned off. If I push it back on forcefully then the machine works but as soon as I remove the finger, it turns off. Is this button issue or some sensor gone wrong? Thanks

Hi could anyone help please. Am not able to set alarm after changing the sensor batteries. Active Faults 1. Kitchen Wirls Supervn F1: Full Set

Hi - would be grateful for any help with the below (can't get British Gas out), Summary: 330+ boiler does not seem to be heating, despite HIVE telling me it is heating. Pressure reads 0.9bar on display. All the hive devices seem to be on and communicating. I think there's a problem with the...

Hi, When running a bath this evening, the hot water went cold and when going to the boiler it was flashing red. So when opening the pressure valve, water came out of another area of the boiler (see video) and did not make any difference to the situation. Please let me know if there is...

The other day for the first time in 4 years, my Pyronix Enforcer Home Control+ panel started beeping and went into a fault condition for the first time under a normal idle state. The error what I believe caused the "fault condition" was a "SMS call Fail" event, although not sure why it...