floodlight

Hi all - need your valuable help to install a new 100W LED PIR floodlight outdoors (garden) and a CCTV. This is a new built with a few 30A RCCB protection units installed in the consumer unit. We are looking to install the floodlight and cctv in the garden. There is currently a light fixture...

Good Afternoon All, My existing PIR floodlight has failed and I am looking to replace it with some additional upgrades The PIR on the floodlight didn't do a great job at picking up motion and I could often walk right up to it before it would detect movement. It wouldn't detect when I drove my...

Currently have a basic outside light on a switch but want to replace with a ring wired floodlight camera. I have extra wires because of the switch but for the life of me I can’t remember what slot I would put them into on the ring backing plate. As it only have E N L and existing has E N L1 L2...

Hi, I recently bought https://tekled.co.uk/products/30w-pegasus-flood-light-pir-motion-sensor-4000k-cool-white-ip65 to replace a existing floodlight that has stopped working. Original cable was just fed through a garage vent into a 3 pin plug so was going to replicate this. The new cable is a...

Hi, I'm looking to install outdoor lights on the exterior of my house. Please check the sketch attached - is this correct and safe for the installation? The plan is: a new fused spur will be extended from the existing circuit, i.e. an existing socket or light. The fuse is 3 or 5 amps. 1.5 mm^2...

Hi, I have a twin spot halogen floodlight with a sensor that keeps turning on and off every few seconds, I've tried messing with the settings and cutting the supply and turning back on but it's still doing it. Any ideas please ? Thanks

Hi Looking at replacing my floodlight with intergrated pir with a separate light and separate pir that will be located around the corner from the light. I also want to add an additional light with an intergrated pir to the same circuit and would like both lights to come on when either of the...

Quick electrical question I currently have a floodlight outside wired into a fused spur which has been taken from a socket many years ago. I've recently had two more flood lights added (mrs not me!!), everything on LED so not an issue with load. When the builder put the lights up he ran...