I have pumped hot water and CH on a three port valve, a Y plan I believe The wiring seems standard to many Y plan diagrams, where there is no wire to terminal 2 (Heating off) on the controller
My guess is I need this wired up for the hive to function fully, but where should it be wired to?
The...
I have a Halstead Heat 60 (17yrs old).
2wks ago both the green Burner On light and the red Lock Out lights started flashing and the boiler won't attempt to fire up.
Tried resetting by turning the knob and also by turning the power off at the fuse - no activity.
I've had a new pump, 3 port...
Hi - We have a Halstead ACE High exhibiting the following issue:
At certain times, upon ceasing demand for the DHW, the boiler will continue to see demand. The piston from the diverter value remains extended, pushing the micro switch and so keeping the demand for the hot water.
At this point...
I had my boiler serviced last month and he made a tweek to make it burn better. Since the service if the hot water tap is turned on and off before the boiler ignites we get 3 loud vibrating noises from the boiler, any idea what this is? Other than this it runs fine
Hi, I'm trying to wire Hive 2 to my existing boiler which is a Halstead Best 60 Gravity Boiler.
I've installed new wiring which is:
3 core cable from the spur
3 core cable from the pump
5 core cable from the boiler
I've wired it up as I think it should be but 'Hot Water' on it's own doesn't...
Hi,
I'm hoping some body could help me
i have a Halstead Best 50 Boiler (Ironic Name) pumped system with hot water tank
The boiler is controlled by a Potterton EP2000 programmer.
I can either have the boiler on or off at various times of the day
what i am struggling to find out is can i...
Hi
We have a Halstead Boiler Eden SBX 30 (about 7 years old and worked generally ok over this period) which is playing up a bit.
When heat starts being demanded it runs for about a minute and then trips. A few minutes later, it repeats this cycle, and so over a period of an hour or two it the...