ideal combi

Hello there My daughter just purchased a house and she had a plumber to replace 2 radiators After bleeding system and radiator fitted, plumber couldn’t find pressure gauge on the system Here are some photos . Ideal es38 combi Any suggestions

Hi, recently wired up a hive to my boiler. The receiver switches off when you turn the heating below current temperature and switches on when putting heat on or boosting. If I leave the clock on the problem is the boiler doesnt switch on or off with the hive controls so it would stay on...

Hi ive lost/misplaced remote thermostat for my ideal combi logic 24 boiler. What is the cheapest way to get a new thermostat for it? I.e. can i buy any thermostat from screwfix or will i need a specific one to pair it with, cant seem to find info online about it. Thanks

Hi We have just had a new boiler installed but the Nest is not working. I don't think its been wired in correctly. Please could someone check the pictures uploaded and let me know. Thanks in advance for any help.

Hi I am attempting a self install with Hive with an Ideal Combi I will isolate all electrics and want to make sure that I am doing things correctly before I do the diy work at home at get stuck. Is my wiring diagram correct below? Can I use the mains into the boiler and connect off the same...

Hi all, Just wondering if anyone knows if there is a way to call for central heating/turn central heating on without a thermostat? Reason is, I've had an electrician install a Nest for me but I'm pretty sure they've not done it correctly, as now the CH is not working - However I don't want to...

Hi All - I am new so please bear with me and my stupid questions :-) I have just had a new Ideal Logic Combination Boiler installed with no external thermostat. I have purchased a Hive 2 to install (as a self install). Does anyone have any simple diagrams showing the wiring needed from the...

I'm at a bit of a loss here and need some advice. I know they're terrible boilers, it was in when we bought the house and it's been trouble free for 5 years, it's now showing it's age and being a right pain. As I say it's been absolutely fine up until a month ago when it stopped supplying hot...

Hi, I have just moved in to a new build home and am thinking about replacing the thermostats with Nest 3rd Gen. The property is Gas and has instant hot water. The house is zoned, upstairs and downstairs with a thermostat in each zone. Boiler = Ideal Logic Combi c30 Programmer = Danfoss FP975...

Hi, First post, go easy! I'm trying to wire a Hive thermostat to my Ideal Logic 24 combi boiler but I'm having issues. I've followed a few of the similar topics on here but I'm having no joy. The problem I'm having is after wiring, the boiler is just always on and no calls from the Hive to...

Hi this question seems to come round and round but each with slightly different circumstances. So I have a ideal c28 mini. It has normally one light on fast blinking. That is on one second off one second back on again. The heating is fine. However the hot water when requested every now and...

Hello All, I am in need of some help. I very recently had a combi boiler fitted, few weeks ago. The problem is it only works without a facia plate on, I am reffering to the big white plate that has the dial names and legend etc. As soon as I put the facia plate back on again it makes a loud...

Hi All, Before I embark on this project I wanted to check my understanding of the wiring. Both programmers use an industry standard backplate. The centaurplus is currently wired as follows: E = Earth N = Neutral L = Live 1 = 2 = Brown (Boiler Live out) 3 = 4 = Blue (Switched live return)...

Hello all, Boiler is in "hot water only" mode but still heats radiators. I don't think it's the mode switch since it wasn't in use at all during the time it started. And it also "ignores" the heating setting and seems to go full on. I found couple other threads mentioning similar problem...

Hi everyone. We have an Ideal C28 mini combi in our house, but it's not been right since we moved in. Using DHW alone, it has been tripping/locking itself out, and the tap water was never really hot. During winter though, we've got by quite well as we found if the heating was on high, the...

Following from my last Thread leaky Ideal Isar HEX Iv decided on a new boiler Looking for quotes for a boiler installation. Im from London Postcode- (E1) Going to replace my old boiler combi to combi same location (kitchen-easy access to flue) ideal vogue c32 GEN2 -Full power flush (2 Bed...