Apologies if this has been asked before but I've read a lot of posts and can't seem to find a straight answer.
I am installing an induction cooker (hardwired) alongside an oven with a plug. Currently there is a double socket behind the oven. It is on a 32A circuit which should be fine.
So I...
Hello, we are renovating our kitchen and have installed (or rather, are installing) an induction hob (Hisence I6433C). We are really happy with the size of the hole we cut - the appliance fits snug, however the hob has a metal frame underneath (I've lifted the hob in one image to show you this)...
Hoping someone can help.
I recently had a B&Q kitchen installed (by their fitters) and there is a fairly sizeable gap between the hob and wooden worktop (image attached).
The fitters have said they can’t get the hob any tighter but to me the gap seems too big. Could anyone please advise if a...
Afternoon
my NEFF induction hob timer bell button doesn’t come on anymore. It’s not the lock as that would effect the use of everything
anyone experienced this?
thanks
Hello all, what is the correct cable to use for connecting a 6kw induction hob to a standard cooker switch socket (cooker switch and a single socket), which is fed by a 32A connection? There is an oven also connected to the single plug socket on the above.
Would 2.5mm T+E suffice (rated at 27A...
Hi folks.
Is this a new circuit or merely a redirected one?
I need to run a new 6mm T/E cable to install a 7.3kw induction hob in place if current gas hob.
Current CU has an existing circuit with 32A breaker that used to go to an electric shower. The shower is long gone.
If I "redirected" this...
Hi all,
I would like to get some advice please on the following circuit for our new kitchen. The proposed layout has a 3.2kw electric oven and a 7.4kw induction hob. These would connect via 45A isolation switches to a 6mm2 radial circuit. I am running the cables myself and would like to know...
Hi I am fitting 3 electric hobs (domino hobs so 30cm induction/30cm grill/30cm teppanyaki) on an island with them being 3kw/3kw/3.7kw loads and each has 1.5m flex cable. Do I need to take 3 x 6mm T&E from CU to each one via separate cooker switches or can I do with less cabling e.g. 1 x 10mm T&E...
The double oven and separate electric hob share a 40 amp supply. I believe this to be on a 6mm cable rounding the distance up to 15 metres through the walls. Both have their own individual fuses with an available socket, this is not used. The double oven is 5.4kw. The separate electric hob is...
Realise this question gets asked a lot (nosed on this site a lot), but couldn’t quite find a specific answer (lots similar though) but, I’m sure someone will know (and tell me to get a man in)!
Recently moved house, previous owner took cook/hob/oven need to install a new oven & hob.
What I...