manifold

I have a somewhat unusual challenge… My underfloor heating system has been designed for a 60 degree flow temperature solely to satisfy the heat demand of a single double-height large room. In reality we have been running it at 50 degrees because that is enough except on the coldest days. It is...

Hi all I'm having a kitchen extension built and getting UFH installed - the quote for that is £2900, which sounds about right to me. Eventually, I plan to install UFH in the rest of the house myself, so I've asked for a quote for putting a four port manifold on the first floor too as part of...

Hi All, The hours has a fairly modern (last 10 years) heating system, a number of radiators upstairs are cold (they were not great last year, but the year before they were fine). I have taken them off the wall and flushed them, but there appears to be a blockage somewhere. I believe there was...

Hi wondering if anyone can help we have 11 zones of under floor heating which are linked to 3 separate thermostats. the plumber is different to whoever laid the underfloor so he can’t figure out which actuator / wire links to which thermostat so at the moment each thermostat heats up the...

I am changing heat exchanger manifold on my baxi main 30 he a system boiler. What kind of silicone sealent I should use between the heat exchanger and manifold… I have new manifold… cw all new gasket and rubber ring. Or do I need to use any kind of sealent ?

Hi, I'm having a (Worcester Compact) boiler installed and while the engineer suggested running the pipework down and behind the various kitchen cabinets, I wondered if it's possible to run them up into the loft area instead. The boiler will be mounted in a kitchen cabinet and the kitchen...

Hello all I'm planning on having an UFH system put in, around 30 sq. m, in size. Pipes will be screeded in around 75mm thick, above a 100mm of insulation. From looking around at various websites, it's thrown up more questions than just picking a kit. I see various brands selling 'single...

Hi All. I have recently had an extension done and we have UFH on just the new extension, and radiators upstairs etc, in the house we have a nest thermostat and a heatmiser stat for the UFH area. The issue I am having right now is that the nest is the only control for heating the radiators and...

Hi, We have had an extension built and are having the layout of the house completey changed so thought it would be a good time to install underfloor heating. I'm a boiler guy by trade but have never installed UFH but it doesn't seem too complicated. Firstly I assume that in the new extension...