marmox

Hi all, To cut a long story short, I have a 17 year old extension that is much colder than the rest of the house. The floor in particular is really, really cold to walk on. I've taken a laminate board up, and underneath is some 4mm foam underlay straight onto concrete/screed. I have no idea if...

Evening all. I’m trying to find a deep bed cementitious adhesive for dot and dabbing Marmox boards onto uneven brick walls. The maximum I can find is about 15mm bed but I’m looking at dabs of 20+mm higher up the walls. I will be mechanically fixing through the dabs. And I want to avoid battening...

My first big tiling job. It's a wet room and I'm at the stage where I have Marmox boards on floor and walls and an Impey former. I'm just about to put down the Impey Waterguard membrane and the instructions specify priming with the supplied Bal APD primer. I tested the BAL primer inadvertently...

I'm doing a wet room and I am just about to lay the Impey aqua dec linear 2 shower former and attach tile backer boards to the stud wall. I feel that I should put the former down first, butted right up to the studs in the stud wall then install the backer boards so they hang over the lip of the...

Hi everyone. I'm about to embark on a complete bathroom refit (very small bathroom approx. 3.2sqm) that will have a corner shower with full height tiling in 8mm porcelain tiles (approx 100mm across). The remainder of the room will be 9mm porcelain hexagon tiles (approx. 250mm across) up to a...

Hi there, I am in real need of some advice please. Bit of a different project but ... Ive created a 12' by 8' mural on x3 wbp 18mm plywood boards. The perimeter of the mural (about 40cm depth) will be tiled with approx 4m squared childrens artwork on ceramic 100mx100mm tiles ( I know ceramic...