miele dishwasher

  1. D

    New Miele Dishwasher Aquastop question.

    Hi. We bought a new freestanding Miele Dishwasher, Model number G7130 around two weeks ago. We had our usual plumber install it for us as we needed an elbow fitted to our inlet supply pipe to enable it to point downwards so the dishwasher Aquastop (solenoid) to work as the instructions. We...
  2. B

    Dishwasher Inlet/Drain problem Miele G977

    Hello I have a Inlet/Drain red light on a Miele G977 plus and it stopped during a wash. There was water in the bottom tray. The outlet hose has a small crack (although not sure if that happened as I removed it). Pump impeller rotates OK. No blockages in filter pit or hose. Following...
  3. M

    Miele G1252SC inlet / drain flashing, blown solenoid valve

    I have a miele G1252SC dishwasher. The solenoid valve (part no. 90873.02) blew so I replaced it, however the inlet/drain light is now flashing constantly. All inlet filters are clean and there are no obstructions. I put some water in the dishwasher from a saucepan but it did not drain. The other...
  4. silverfox2019

    Miele Dishwasher G1143 SC - inlet(?) banging + Inlet / Drain lamp warning

    Miele Dishwasher G1143 SC - inlet(?) banging + Inlet / Drain lamp warning When initially filling and again about an hour later (I'm guessing when the rinse cycle starts) , the dishwasher makes a banging noise. The flowing sound of water stops suddenly like a "glottal stop" making a kind of...
Back
Top