noggins

  1. S

    Bangs in the middle of the night!

    Some while back I took the ensuite apart and removed the floor as it was poor quality chipboard, slightly sagging and definitely not straight! I then straightened up the joists and added a number of noggins where the joints will be for the plywood floor and said new floor is now laid, but not...
  2. D

    Concrete Slabs Underneath Hearth

    Hey everyone, I've just taken out the hearth in one of my first floor bedrooms and discovered two concrete slabs built into the wall. They're really solid & sturdy, but I'm not sure how far they are built into the wall. I was wondering if I could run my noggins directly off of them instead of...
  3. L

    Downlights - Remove Ceiling Noggins??

    Hi all Fitting downlights in my bedroom. Located joists, went between them, drilled hole. Went to other side of room, same spacing, drilled hole, found myself directly in the middle of a noggin (i.e. a small piece of wood running between the joists to support the plasterboard edges). We've...
  4. A

    Lifting Glues Chipboard Floorboards - is it worth it?

    Hi, I am laying a new laminate floor in one of the bedrooms and have just lifted the old carpet and had my first look of the tongue and groove flooring. Some of the tongue and groove joints are very loose and when walked on sag and cause the floor to creak slightly - in the extreme cases the...
  5. M

    Stud wall with no noggins?

    Hi My builder is almost at completion stage of doing major renovations at our property. We have noticed that one of the kitchen stud walls flexes quite a bit. They have now been plasterboarded and skimmed. From closer inspection I seem to have noticed there are no noggins in between the stud...
Back
Top