oil burner

  1. F

    Very strange symptom - firebird boiler Reillo burner just blowing

    Hi thanks in advance fire any help. My 20 year old firebird 90 boiler has run really well with only one control box and one photo cell changed 3 years ago. 3 weeks ago it started to flame out when trying to ignite when hot so I decided it needed its first proper service as I have done it...
  2. polygraph

    Recommendations for New Oil Burner - Equivalent to Riello G2SX (419T55)

    Hi, I recently moved to a property with an ancient Firebird Olympic 50-82. It's developed a fault where on start up the fan motor runs continuously but the burner will not proceed to ignition. It will stay in this condition until you turn it off and it does not enter lock out - the fan just...
  3. U

    Ran out of oil

    Hi all We stupidly ran out of oil and have since refilled the tank. We know that it probably needs bled first so have been trying with no success to bleed it and reset. The first problem is we are unsure which is the bleed valve as ours looks different to every other one we've seen (it's a...
  4. Mike15/19

    Lockout Worcester heatslave 15/19

    The problem is more burner related Worcester heatslave 15 19 oil boiler It is a bentone b9 burner made in 1999 With a danfoss bfp 21 l3 oil pump . The boiler will run fine with heating on but about 1 in every 3 or 4 times it goes to start up it will lock out , I will press the lockout button...
  5. M

    I'm stuck! Boiler wont start up.

    So, oil ran out, found out (from you guys) how to bleed it, couldnt release the pressure gauge value (kept bending Allen keys), This point boiler firing up then locking out, Pressed the reset button while system turned off and now with the boiler turned on the button still depressed!, all ready...
  6. A

    Oil Boiler Lockout

    Hi guys, I’m having an issue with an HRM Wallstar oil boiler. I have completely replaced the burner for brand new but it is still going into lockout. The pressure is building up and it fires up then gradually the pressure drops off and goes into lockout, if I manually bleed off some oil before...
  7. S

    Can someone explain Return Temps to me?

    I've always just assumed that the colder the return to the boiler the more efficient the boiler would be (i.e. greater differential so heat transfer through manifold is faster). But I've come across direct evidence to the contrary (e.g. boiler recommends minimum 60 degree return, 'hearth' temp...
  8. T

    Replacing 80's heating timer (dial) with wireless

    Hi forum I would like a little advice. just bought a house and all it has to control the heating is a dial-based unit in the corner of the kitchen. there is no thermostat (other than the throughput on one the oil-burner itself out in the garage). So with no thermostat in the house, and just...
Back
Top