question

  1. J

    Question about a single pipe heating system

    I have a single/one pipe heating system in my house and there is one radiator that does not get warm useless you wait a hour + , I have tried swapping a radiator for another known good radiator and the only difference I can see is the pipe work going into the radiator one pipe is straight and...
  2. K

    Ceiling light not working - strange "bulb" / no bulb?

    Hi, Please excuse my ignorance here, I don't have much experience with lights or electronics. My flat has a ceiling light in the bathroom which has stopped working. The "bulbs" that attach to it seem to be more of an ornamental way to spread light rather than a "bulb" - they screw in and...
  3. C

    Draughty walls.....

    Have brick-built barn, which has been previously converted by putting timber studding about 30cm from inner brick wall and covering with Kingspan. 2 of the rooms are at angles to the rest of the building and are much colder, both single story with vaulted ceilings. Both have huge draughts...
  4. JD2012

    Bolt Type Query to bolt down Vice.

    I am looking for bolts to attach a Vice to a worktop in my shed. I found one that fits but I need it a bit shorter about 6mm in length and I don't have nuts. It says on the head M BUFO 88. Does anyone know if B&Q stock these or something that will do? Thanks
  5. C

    Door Hinge Attachments

    Hello All, I've just purchased some new internal doors and they have come with these metal plates in the slots cut for the hinges. There's three of these per door (top, bottom, middle) and I've tried (unsuccessfully) to find the correct hinges that with either fit into the attachment or into...
  6. V

    Removed wallpaper - what is this?

    I'm in the process of removing wallpaper from the living room so we can re-wallpaper. Doing so, I've discovered a 1-2cm line running horizontally along the wall, about 1/4 of the way down - does anyone know what this could be?
  7. B

    Combimate Front Cover

    Hi, my husband’s just replaced the crystals in our combimate for the first time and now the cover (which also switches the water off) won’t fit back on?! He’s tried everything, taking it all apart again etc but it just won’t go back on, any suggestions?
Back
Top