router

Hi all, hope everyone’s well. I’ve got a few little projects on the horizon, nothing too sizeable, but workmanship and timescale would definitely improve with use of a few power tools I don’t currently own, like a router and track saw. I can’t justify spending a lot as I won’t have regular use...

hi all, recently we were upgraded to VDSL and sent a new TalkTalk HG635 modem. this works but I wanted to use a separate router to handle the home network traffic and DHCP for address reservation + better WiFi. so have bought a DIR-878 for this. I have the HG635 in bridge mode with DHCP turned...

Wonder if you guys can advise please. I’ve been installing a new kitchen and have solid oak worktops. When testing on some off cuts (new router, old one died) I noticed I’m getting some burn/ scorch marks. The router bits are new, is there a rule of thumb in minimising these scorch marks...

Currently fitting my new kitchen. As I like making things difficult for myself, I've decided to have an undermount sink and was wondering if anyone has any tips before I start. Have a 40mm oak worktop. I had intended to use a router with a top bearing bit and make up an mdf template. What's...

I have to replace my windows board and was thinking of buying some length of windows board and cut to size than machine the side and make it rolled edge as per the front having a nice 45° sharp corner. I got a router but never done any rolled edge. is there anyone helping me to understand what...

Hi, I need to cut a 10mm wide channel in a few fire doors to fit smoke and heat seals. Ive been struggling to find a router under £50, which is a bit much, Ive got an old circular saw, I was wondering if I can get a good result by running it up and down a few times. I guess the channel has to...

Chaps I have a 600mm X 200mm x 10mm piece of Acrylic. I need to shave 10mm off one face down 3 edges and 20mm off the other to a depth of 3mm. I have attached an image to demonstrate. My question is - I'm a bit lost, which Router Bit do I need? All advice gratefully received, Kevin

Not exactly home automation (although I do have a lot of it), however it is a integral part my life and one may find it interesting. Regards: Elliott.

Hi There, Im hoping for some advice with regards to router and a slot cutter I need to use a 2mm slot cutter to cut a slot for T moulding. So far so good However, thus us my first step into routing and I'm more then happy to have a crack but I'm confused by all the different terms...

Has anyone got or have any experience with with the above router table? I can't find any reviews and very little information about it I have seen a few for around the £150 mark.

Question for the experienced. Part way through the House of Pain- looking at skirting board for the first 3 completed rooms. Ceiling height pretty much requires 6" or 7" but the price of 7" is fairly horrid (£4- odd/metre). Given I've got at least 150 metres to put in, is it worth me spanking...