shower screen

I’m planning to install a shower tray, but I’ve noticed it’s bowed by about 3mm, which is within the manufacturer’s tolerance. My concern is how to securely attach a shower screen, given that the tray isn’t perfectly flat. Do you have any advice on the best approach?

1. Do I need to seal the inside of a bath shower screen where the chrome plated plastic mount meets the wall on the inside i.e. vertically down the side here? 2. And should I do it on the opposite side too i.e. the outside of where the mount meets the tiles? Note: It feels like there is a kind...

Hi! The hinge of our shower screen broke when we moved it to clean it. I am not sure of the make as this was fitted before our landlord bought the place, but he told us it is pretty generic. I am really struggling to find a replacement in bathroom or DIY shops. I have now emailed a few...

Hello. We've just moved house, and the bath we've inherited is a P-shaped walk-in bath, no idea of manufacturer (although it might be this one or similar...

Hi all, I am going to install a showescreen but found I have notched tiles going up the wall, so its not level. I am thinking of installing this: https://www.wickes.co.uk/Wickes-Chrome-with-Modesty-Panel-Half-Frame-Bath-Screen---1400-x-750mm/p/161402 What is the best way to overcome the...

I'm going through the install guide for this Victoria Plumb glass shower screen and I don't quite understand what it means in the attached picture. 0~15mm gap, does it mean the screen should not butt up right into the mounting frame and there should be 0~15mm gap? The reason I ask this is that...

Hi, Looking to modify my elderly/disabled parents shower ATM they have a rectangular (approx 1000 x 680mm wide) low level tray and a fixed glass panel The shower seat will only fit into the tray facing the fixed screen , which doesn't leave enough room for them to get in and out of the chair...

hi, Ive had this glass shower screen a couple of years, the top hinge works loose though. it seems like the screw holes should be at the top. What do you think about drilling one near the top of the bracket ? its quite close to the tile edge to drill through though ? or I wonder if theres some...

Hi there I need some help I’m trying to fix a shower screen (the bath type) to a plasterboard wall with splash back but I haven’t got a clue what fixing to use, I was wondering if I could just silicone the bracket let it dry and then fit the shower screen but I just don’t trust it any...

i have an old Outasight shower screen over the bath I want to remove as it's hopeless. I have unscrewed the screw and cut through the clear acrylic sealant. however it is simply not shifting. It's like its superglued on. I have now cracked one tile by trying to lever it off and am a complete...

Hello Redoing our bathroom, and we are hoping to install a half wall, topped with a fixed glass screen as one of the walls of the shower, the other will be a hinged door/ panel. I cant work out what screen I can buy to go on top of the wall? A fixed bath screen would fit, but is that an OK...

I have been left with a new bath after I purchased for a job that got cancelled! It's a Brand new, full packaged Tempo Arc 170cm Idealform Plus+ Shower bath, left hand Capacity 195 litres Location is Kendal, Cumbria If you have any projects which can use a left hand shower bath, please give...