Hello all,
Hope you are having a good day.
I'm looking to replace the analogue Siemens RAA21 thermostats currently installed in my flat with Moes Smart Thermostats. I am hoping someone here can guide me which would be the correct Moes variant I should purchase and also how they should be...
Hi. We have a Siemens WI14S440GB washing machine - aka SI 14.44.
It threw an F43 error the day, so I've taken it to bits and replaced the brushes (both of which had worn to under 10mm) - but the F43 persists. The new brushes are installed correctly and in contact with the commutator and the...
Hi all,
Looked extensively but can't find a definitive answer to this.
Existing system is Worcester Bosch 30cdi boiler with potterton ep6002 controller and Siemens rdh10rf wireless roomstat ( and accompanying receiver unit rcr10/433-gb).
I am installing the Hive 2 ( water and heating) to...
Hi
9 years no issue. Found that fridge is noticeably colder. Veg is freezing at back of fridge.
Behind the main vegetable drawer there is a white plastic coil I think it is the "tank 0526 / 00672953" on siemens website. Clear solid ice had formed around it. I managed to remove most of the ice...
Have a Siemens microwave combi oven which has just started intermittently shutting down after around 25 seconds on microwave (i.e. if you set the time to one minute, it counts down and fails as 36 seconds appears), and there is no evidence of heating during that time. The conventional functions...
Hi,
Happy new year all!
I hope someone can help please;
I have a Remeha boiler which heats radiators and a hot water tank. It is currently controlled by a Siemens RWB29 programmer, which can be used to set the water heating times and central heating routine. We have always nust pressed the...
Hi,
I'm replacing my Siemens for a Smart Drayton Wiser hub and need some assurance that I have wiring correct, The Siemens is currently connected with 4 wires Blue to Neutral, Brown to Live, Black to L1 and Grey to LX, see attached pics.
The Drayton Wiser hub back plate will have Blue at N...
I have a Siemens RAA02 and want to install Google Nest Thermostat E with Heatlink
Can I replace the room thermostat it has wires in 1 and 2 and earth, or do I have to take out controller.
Really not sure what either wires are for and where they go into Google Heatlink.
DSC_0876 by Ben...
Hi everyone,
I live in an apartment block that has an old Entrotec door entry system. The standard Entrotec ED3 handset provided makes a horrific noise when someone buzzes in and I want to change it.
I am looking to buy off eBay an old Siemens DCW20 Door chime and connect it to the existing...
Hi everyone,
I live in an apartment block that has an old Entrotec door entry system. The standard Entrotec ED3 handset provided makes a horrific noise when someone buzzes in and I want to change it.
I am looking to buy off eBay an old Siemens DCW20 Door chime and connect it to the existing...
Hi all,
Hopefully you can help me with what seems a simple wiring task.
I have just purchased the Hive kit and am trying to replace the existing Siemens Landis & Staefa RAA02.1N thermostat with the new Hive Receiver.
There are just 2 wires and an earth wired up and it useds the following...
Hi there I am installing a new 3rd gen Nest Thermostate which is replacing our old siemens RDE100.1 wireless one.
On the wall the old seimens is has connectors that fit into slot on the wall.
I have no idea what the zones are so i can't find which slot they go into on the nest.
Can anyone...
this is what we have at the moment.
in the utility room we have
a ferrolli boiler
a siemens rwb27 controller
up stairs
there is a seperate on off switch for an immersion which provides hot water only
but when the siemens is switched on, it heats the house and also heats the water
the...
Hi all,
This seems like a friendly forum so I thought I'd give it a go. I've just had my gas boiler replaced and had a Siemens RWB 1007 timer installed as part of the installation which works fine except that I can't set a third on/off time. I've called Siemens, but their recorded message told...
My Siemens dishwasher, about nine years old, makes a really loud squealing noise for 10-20 minutes at a time while it's in the middle of its programme. Think banshee with a stubbed toe, about 2kHz, and loud enough to be heard throughout the house.
It doesn't do that when filling or emptying...
My Siemens dryer E750 has developed a fault where it cuts out. Engineer reports it's due to a circuit board dry joint; suggested replacement.
The machine will turn on and work fine for a while. Then it stops. No power reaches the control panel which looks like the machine is off. But there is...
Hi all
We have a ten year old Bosch Siemens SE65T390GB integrated dishwasher that I would estimate has run for approx 3,500 wash cycles. It started to leak at the door seal which is an easy fix. I have started to research getting a new model in case it has reached a point of being unreliable or...
Hi,
My boiler is all working fine and serviced recently. My Siemens Thermostat RCR10433 needs repairing since when the temp goes low it doesnt switch ON the boiler. As suggested in other forums a whack on the thermostat unit switches on the boiler central heating system.
I have done the reset...
Hello. I have the current times set:
[A1-ON] - 06:00
[A2-OFF] - 08:00
[A3-ON] - 17:00
[A4-OFF] - 20:00
Currently heating will only turn on if time current time is in-between either A1 & A2 or A3 & A4 only if the temperate is under a certain temperate (setback)
How do I make the heating turn...
Does anyone have any experience of this?
Had this last week and remove some of the parts at the bottom and the filter and it "seemed" to work again for a while..
Last night, it came on again with E:15 error and some of the water leaked out of the front?
This is obviously a draining issue.. as...