skim coat

Wall panels fall down with skim coat, it’s only done in 3 months, but already falling down. I think it’s the glue applied not evenly and too much, and should not install on skimming layer. Anyone can give good advice or even can fix it, please? Never use inexperienced builders!

I’d like to try and skim coat my walls after pulling off the old wallpaper. The walls aren’t in terrible shape so I think I only need to coat to 1mm or 2mm deep. I’d like to try myself because I’d like to learn the skills. Should I use a joint compound like Toupret or a multi finish gypsum...

Hi everyone, I’m new here. My partner and I recently bought a terraced house, built around the 60s. The old wallpaper in our bedroom wasn’t done to a great standard, and we also struggle with mould which we think is affecting my partners breathing. We had a survey done when we were buying it...

So I’m reskimming this wall, I rolled yellow grit on it first and then levelled it up with some bonding (wall was curved) . Before I skim with multifinish tomorrow, should I PVA the bonding or shall I roll some more yellow grit on it?

Hello We are having the gable wall in the living (solid brick wall) sand / cemented and then skim coated. We are having this done by a contractor What would you expect. Would there be two layers of sand /cement put on the wall. How long do you need to wait between coats of sand /cement and...