smart switch

  1. M

    Smart Switch Installation

    Hi everyone, I have managed to change most of the old switches in my house for smart switches but I'm having an issue with the hallway. It is a single switch that is linked to the landing. (I really don't know the terminology so forgive me lol). The hallway switch has a common and two switch...
  2. I

    Powering smart "switch" from existing switch.

    Hi! The store I am buying my smart switches from claims that I can do a false 2nd gang switch by without needing extra wiring to a light, but just tapping into power from the existing light switch. I was wondering if anyone knew how I would go about wiring this. I have made a diagram to explain...
  3. Tadaz

    Older wiring to new 2-gang 2-way and 1-gang 2-way smart switches

    Hi guys I am trying to replace my old 2-gang 2-way and 1-gang 2-way switches with the new smart ones. Could anyone please help me to achieve it? I tried to draw a little scheme for you to understand the situation better. And here are the photos of the switches and their wirings. 1-gang...
  4. M

    Putting smart switch after fused spur

    We have a heated towel rail with the electric supply coming via a fused spur switch in another room, as normal. I'd like to put a small smart switch between the fused spur and the towel rail, probably in it's own section of a dual surface pattress box, to better control the towel rail and to...
  5. Dan604

    Smart Light Switch no neutral - do I need to install capacitor?

    Hi All, I purchased a Moes 1 Gang smart switch (no neutral). Switch is installed and working fine with my led fitting without the supplied capacitor installed. My question is: Is it essential to install the capacitor at the fitting if the lights aren't flickering at all or is it ok to use...
  6. Tadaz

    Older wiring to a new 2-gang smart switch

    We came to live in a new place which was built in around 1960 but this place has an extension which was finished to build a couple of years ago. This extension has a living room with a 2-gang switch. I purchased a 2-gang smart switch that needs neutral wire. From the colouring of the wires, I...
  7. marcrok911

    How to wire a 2-gang 2-way Light switch? to new smart switch

    Hi there, I'm scratching my head trying to find out how i can rewire my new smart switch. I have an old 2-gang 2-way light switch with 3 terminals top and another 3 terminals on the bottom as seen with the diagram below with black, grey and brown wiring. L2 L1 L (top) L2 L1 L (bottom) S1 by...
  8. W

    Replace 3-Gang + 3 Way switch, with a 3-Gang Smart Switch with No Neutral

    Hi all, I recently swapped my living room light switch which was a 1-gang basic light switch, and replaced it with a 1-gang smart switch. The wiring behind my light switch had no neutral wire, so I made sure I purchased the "no neutral" version of the smart switch. Now I'm moving onto my...
  9. T

    3 Gang 2 Way Smart Switch

    Hi. I’ve reviewed previous posts on this subject but I’m struggling to find a solution to what is probably a common problem. I have 2x 3 gang switches that I’d like to replace with a Smart Switches. Downstairs the 3 gang operates a light in the hallway and an outside light and also has a 2 way...
  10. M

    Smart Immersion Timer

    I've been trying to find a smart switch/timer to replace our standard double pole switch. So far I've struggled to find a smart double pole switch as a direct replacement. Has anyone any suggestions or examples of what they have used? Our heating/hot water can't be controlled separately so...
  11. Mikeylaw81

    Old wiring to new smart switch (2 Gang)

    In my hall way I have a 2 gang switch where one controls outside light and the other the hallway light. Hallway light can also be controlled by a separate switch in the hallway too. I’m installing a smart switch where I’ve tried once and managed to have it connected and one light the Hallway...
Back
Top