smart thermostat

My central heating thermostat (CentaurStat 7) has gone faulty and so needs replacing. I would like to replace it with a programmable thermostat that will also connect to a phone app so I can control it remotely etc. However, the existing thermostat is a 2 wire, battery powered device and mains...

Hello, I've bought the thermostat in the picture and have connected the 3 wires from my old thermostat. The thermostat turned on but it won't turn on the boiler. I have boiler board photo attached. Please help.

Hello all, Hope you are having a good day. I'm looking to replace the analogue Siemens RAA21 thermostats currently installed in my flat with Moes Smart Thermostats. I am hoping someone here can guide me which would be the correct Moes variant I should purchase and also how they should be...

Need some advice as to how to wire up my new Smart Thermostat (picture 1 below) My Old Thermostat has three wires red, blue and yellow( taped red for live) and runs on 3V (see picture 2) The new Smart Thermostat needs 240V independent for 3 and 4 as it is a dry contact. Just need to know...

Hi, I'm after guidance on which smart thermostat will work with my district heating system. These are still not that common, so struggling to get a factual answer. My current system (photos attached): * 2 zone system, each with a programmable thermostat. One to bedrooms and another to living...

I have a refoss mts200 smart thermostat, ive wired it in and now the voltage keeps dropping every three seconds or so, therfore the thermostat keep coming on and off, ive put my multimeter on the terminals and the voltage is up and down but its steady with the old thermostat connected.

Hi, I just moved into a house which has Vokera Compact HE boiler with mechanical clock timer on it which is super inconvenient and therefore would like to change to smart thermostat. My current boiler (Page 35 for wiring diagram)...

Hi, I currently have an ideal combi boiler, which has as Channelplus H27XL Horstmann as the main control unit and 2 thermostat dials-HRT4-A (upstairs and downstairs) with no hot water tank, I assume its relatively simple to setup, can anyone recommend any good smart thermostats I could go for...

Hi I've just moved to a new house and I’m looking to replace my current heating system controls with a Drayton Wiser smart system. I have an Ideal Vogue Max System 32 boiler with water tank, a basic Drayton thermostat that controls hot water on a timer and a Salus thermostat. I also have a...

Hi all, I've just bought a Drayton Multizone Smart Thermostat and 5 of their smart TRVs and looking for advice on the best way to set things up so had a few questions. Please let me know if you need to know anymore about the house and number of rooms to advise best. The boiler is a Main 30kw...

My heating engineer is going to install a new combi boiler for me (Ideal Logic 2 Max), which I think he will fit with a standard thermostat / control. This boiler seems to support OpenTherm, and I'm wondering about fitting a smart thermostat and radiator valves at a later date to improve...

Hi, I accidentally bought a Moes Water heating thermostat (GA) instead of a gas boiler thermostat (GC). However, it looks like I could use it for the same purpose according to this diagram: My present thermostat only controls room temperature via a siemens rde thermostat (see attachments)...

I have purchased a smart thermostat from Amazon, I currently have a danfross (tp5000 I believe) Im looking for advice on the wiring or if it can/can’t be done.

I'm looking to get a new combi boiler fitted soon, likely a Viessmann. The combi boiler will be servicing about 9 radiators (including 2 towel radiators) and 2 showers in a 3 bed flat. I'd like a smart thermostat system for this, but am a bit flummoxed by the options especially the zoning...

Hi I am looking to upgrade our Drayton Digistat 1 thermostat with the Drayton Wiser Thermostat 1 kit but want to check wiring for the Heat Hub if anyone can help. So existing digistat is battery powered and has three wires for three connection prongs as follows.- Red into terminal 1 - which I...

I installed a Wireless starter kit last night however, we only have hot water and no central heating I followed the instructions from the Tado app for the install. I bridged the connections where the old thermostat was removed. The only way I could get the heating to work was to reinstall the...

Hi all, Wondered if anyone could help me out. I wanted to install a new smart thermostat myself. A little background: From UK I have my old thermostat with 3 wires plus earth I wanted to install this Moesgo smart: From the research I've done so far. Would I be correct in saying: OLD...

I've moved into a new house and I'd like to upgrade to a smart thermostat, such as the Draton Wiser. Self installation seems do-able but I don't understand my current Honeywell thermostat CM907. Most smart thermostat install guides show many wires coming into the backplate of the existing...

Hello, I am trying to replace an old Honeywell T6360 main wired thermostat with a volt-free smart thermostat. I have an worcester bosch greenstar 30i boiler The current thermostat is wired up as shown in attached photos. From my measurements and bolier digram, I believe the wires I have now...

Hi, please can someone help, I want to replace my old thermostat With a new thermostat, please can you help with wiring? I will attach pictures. thanks