studwall

My house is very cold so I have decided to try insulating my living room wall. It's the inside being insulated as the house is in a conservation area, meaning the outside is a no go. I have built a stud wall and placed foil back foam boards snugly into the frame. As the room is not huge, the...

I'm removing a section an old airing cupboard and will be closing the opening with a stud wall. I've had an engineer give me the thumbs up on removing it. The stud wall will be plasterboarded and tiled and a radiator and cabinet will be installed on it. The existing cupboard wall is made from...

I'm going to seperate the garage to create a utility room and was wondering if a stud wall can be used instead of block work? If so, what depth should the timbers be and what PIR board to use? I've seen Wickes stud work timbers are 89mm but PIR board is either 75mm or 100mm.

I am planning on putting a stud wall in an archway to seperate the living and dining room. The archway is 160mm wide. I will be using 12.5mm plaster board on either side and skimming over to finish. CLS timber seems to either come in 89 or 140mm width. Obviously if i went with 140 it wouldn't...

As I moved all my services under the stair, I thought would be good to closed it down and have access with double door opening. This will allow to push is the washing machine as well and have access for boiler and cylinder maintenance. My idea is to frame off and board on both side having it...

I understand materials during lockdown has been in shortage but what I got delivered is awful. Trying to make a very small wall but when doing nothing the stud does not align and this is causing me a lot of headaches. I have attached photos. What do you do in this case. Do I made some...