toilet seat

I'm trying to replace a toilet seat but the fixings are hidden by a plastic panel with no visible way of releasing it. The panel only moves slides slightly forwards&back and side to side. See attached photos of the top and each side. There is a small loose bolt in there from when I removed the...

Hi, The toilet seat was loose, so I decided to cleverly unscrew the mini rod, and to my horror the fixing on the otherside of the hole underneath, feel straight to the floor. I cannot access this now as the hole is too small. Please see photos. It's a back to wall toilet. Is it an easy job to...

I was in a cafe and saw this neat arrngement of a seat for a child. I do some work in a church and this would be ideal for them but I don't have a clue what it is called, who makes it, or where to buy it. I'd really appreciate any pointers to where I can get some of these.

Hello, I wonder if anyone can help with ideas on how to remove this toilet seat - photos attached (I just moved into this house, and there are no brand markings on it). There are no buttons to release the top; I've removed little caps from the inside, which reveals a small bolt (difficult to...

Hello, I know most toilet seats have either button locks to release them from the hinges or just screws. But for the life of me I can't figure out how to release the toilet seat pictured. 16347245876091799973375533701959 by diytool posted 20 Oct 2021 at 11:10 AM...

Hi all, I'm trying to replace an old toilet seat but I found these screws once I removed the seat. I tried everything to remove them but the screws won't budge. I'm not sure whether there is a trick with the wing nut but the screws seem completely stuck. Any ideas? Thank you!

My toilet seat is broken (a crack in the middle). I tried to remove the old seat, but I am not able to turn the screw. I tried plenty of wd40 and penetrating oil, but it is still not moving at all. I read online that some suggested using a hacksaw, but there is no gap between the bolt/screw and...

I need to remove the toilet seat from the pan and can’t seem to remove the bolts holding it. I’ve tried screwing them out and it won’t work. Any ideas would be a great help!

Hi guys. Long time forum lurker here. I have been having trouble removing a toilet seat base with quick release fittings. I have a varied level of DIY experience, but it does not extend to cover this! I tried some googling and reverse image search, but that just brings up a series of photos of...

Hi there, anyone that knows how I can take off the mount cover of the toilet seat? It usually comes out with an easy pull, but this one seems to be stuck and it's not coming. I have attached a picture of it. Many thanks in advance for your help or advice. Antonio

How do I access the toilet seat nuts and bolts on the following please?

how do I tighten my toilet seat that has no visible fixings it and lever or button to release the seat?

New toilet pan with a cistern-concealing 'cupboard' recently installed. Due to my careless mistake the 'cupboard' when it arrived was over a foot deep and in the restricted space available this only left a few inches between the front end of the seat and the wall. My bad. I put up with the...

Hi there, I am struggling to work out how remove the fittings of an old toilet seat to replace with a new one. I've attached a picture, hope you can help! Thanks in advance.