wall mount

  1. H

    Wall Mounted Weight Plates On Single Layer/Skin Brick Wall

    Hi, so I am assessing if my exterior garage/outbuilding can support the weight of a wall mounted weight plate storage rack (See picture two for the rack), there would be two racks both weighing at 80KG~ when plates are fully loaded at two spread-out locations as marked in red, photo 1. The wall...
  2. G

    Finding the right screw

    Hi all, I'm trying to find the right screw to attach my speaker to a speaker stand. I have the details (see image) but at the nearby hardware store they are pretty useless. First they gave me one screw (M5 I believe) which is too small. Then another one (M6 I believe) which is slightly too big...
  3. T

    Installing Plywood between Metal C Studs

    I live in a 2018 built house. As such, the internal partition walls are all constructed from Metal Studs (looks to be GypFrame C Studs), which seems to be the "new way" of doing things. I am looking to put a TV up on the living room wall. Having considered all the options (plasterboard...
  4. dunxd

    Attaching MDF Radiator Covers to wall

    A few years back I got some radiator covers to hide unsightly radiators in my house. They are MDF, look great and I can live with any impact they have on radiator efficiency. However, they were fitted to the wall with MDF blocks cut to hook into recesses under the top shelf. These blocks...
  5. zorgan

    Wall Mounting a TV fixture advice

    I have plasterboard wall here, i've determined that it's 600mm across from the left (which is the main outer wall with the window in my bedroom) I have painted a sheet of MDF to size and plan to screw it to the wall and bought silver screw cups for cosmetic purposes, I plan to put a screw...
  6. R

    Plywood, Osb & Plasterboard vs Home Cinema

    Good Afternoon All, My first post here, but first of all I'd like to say there's a huge amount of helpful information on here from you guys! This is my first project in my first house. It's a new-build property and I'm planning on putting a basic cinema system in the lounge. It'll include a...
  7. R

    Plywood & Plasterboard vs Home Cinema

    Good Afternoon All, My first post here, but first of all I'd like to say there's a huge amount of helpful information on here from you guys! This is my first project in my first house. It's a new-build property and I'm planning on putting a basic cinema system in the lounge. It'll include a...
  8. J

    42" TV, double plasterboard wall, steel "I" studs - mounting help

    Hello I'm trying to mount a 42" LG TV to my plasterboard wall. I have bought this bracket which has 3 holes for mounting in a vertical arrangement directly into a single stud...
  9. L

    Hiding TV power cables

    Hi guys I have recently moved into a new build property and I have wall mounted a TV on to an internal stud wall in the kitchen/diner. I want to hide the cables behind the wall if possible but I am stuck when it comes to the power cables. The reading I have done seems to have conflicting views...
  10. L

    What size and type wallplug for shown screw?

    Hi everyone, I am planning on mounting my punching bag on a brick wall. I've got everything except for the wall plugs for the bolt screws. I've attached an image of the bolt screw. The following are its dimensions: Length with head: 5.65 cm Length without head: 5.15 cm Diameter: 7.5 mm Can...
  11. A

    Installing a wall mounted sliding mirror in bathroom

    Hello all, I hope this is the appropriate forum for this - I was hoping someone would be able to offer me some advice. I have very recently moved into a flat in which the bathroom has one smallish window above the sink, with no mirror anywhere or, really a reasonable surface to put one. The...
  12. A

    Installing a wall mounted sliding mirror in bathroom

    EDIT: I am very sorry, I did not read the rules for this forum first, please could an admin delete this post, I have reposted in "General DIY".
  13. T

    Wall mount worries!

    I recently moved into a flat with a wall-mounted TV which I'm now spending half my time worrying about. As you can see from the pictures the top two screws are jutting out, I'm not sure how far back they go and if this was intended to have the TV at a slight viewing angle? I basically want...
Back
Top