y-plan

  1. T

    Underfloor heating into existing Y plan heating.

    Hi, some years ago I had wet UFH installed in my conservatory. It was just chopped into the existing Y plan wiring and plumbing. The problem being that when UFH demands the CH/HW runs and vice versa. We have put up with it but now as we are spending more time at home it needs fixing. The best...
  2. G

    3 Port valve wiring advice

    Hi everyone, long time reader, first time poster. Need some advice please. We have an old heating system - Baxi bermuda back boiler (serviced every year and running fine), hot water tank, pump and 3 port-valve in the airing cupboard. I believe it's a Y-Plan set up. Couple years ago, upgraded...
  3. X

    Y-Plan Woes...

    Hi all, I'm looking for some help as I've exhausted all my resources and knowledge. Let me describe the current system... Boiler: Potterton Suprima 30 Timer: Center EHE0200160 Frost-Stat: Potterton PRT-100 Room-Stat: Potterton PR-100 Hot Water Cylinder: Joule Cyclone Indirect/Un-vented...
  4. davemate23

    Navigating my central heating circuits and fitting 3rd Gen Nest

    Hi all, I just bought a house and noticed the central heating wiring was a bit of a mess. I bought a Nest 3rd gen and thought it would be worth trying to sort it whilst fitting it into my new house - everything was wired straight into the old Honeywell ST7100 without any sort of junction box...
  5. M

    Install Nest over Potterton EP2002 Y-Plan

    So there I was I planned everything in advanced for my father's home. He sent me all the details of our current boiler and heating system and I was convinced that it was a y plan system because i have a 3 port valve that says "y plan". I arrive to do the job and I see this silly wire set up. Why...
  6. P

    Wiring NEST 3rd GEN to Y-Plan, check my wiring please

    Hey guys, My wife and I have recently moved into a new house this month, and in doing so had the whole house rewired. The electrician came and removed pre-1977 Steel cable from the home and replaced the whole mains. In doing so he has removed all of the bottom side of my Honeywell 10 way...
  7. J

    Mid-Position Valve

    Is it normal for the orange wire of the mid position valve to temporarily cease being live when the valve is switching from the mid-position (heating + h/w) to the heating only position? This causes the boiler to momentarily turn off.
Back
Top