10mm Toilet inlet valve?

[goonerman]

Hi

A bit frustrated..can anyone help me out? My mother in law's toilet inlet valve has broken (bottom cold fed supply). However the plastic inlet pipe isn't the standard 1/2". The cistern won't accept the normal 1/2" (hole not large enough), and nobody appears to supply the size currently fitted (looks to be 10mm or 3/8"). The thread is also finer the the "normal" 1/2" sold by suppliers.

Driving me mad as all the suppliers I've talked to cannot help. Hope someone can????

 

[seco services]

do you know the make of the valve or toilet ?
i know many of the laufen toilets i have fitted are 10mm but they come with a conversion kit to 1/2" feed.

 

[goonerman]

No, I don't know the name. I do have a conversion kit however this is for connecting the plastic pipe to standard copper pipe on the Outside of the cistern only as the hole in the cistern doesn't accept 1/2"

 

[seco services]

can you post a pic

//www.diynot.com/forums/viewtopic.php?t=99672

 

[goonerman]

Here's a picture of the thread. I've ascertained the name now...It's ROCA.

http://s301.photobucket.com/albums/nn69/goonerman_photo/

 

[seco services]

is it like this for a roca with 3/8 inlet

 

[goonerman]

Yes, that's it exactly. I've just spoken to ROCA who say I can order via City Plumbing or Travis Perkins. Part Number 8220100. I'll try giving them a call or can you supply?

 

[seco services]

no i don't supply but try these this is where i found it.
they offer a good service used many times.


http://www.lunns.net/

 

[goonerman]

Ok AND a BIG thanks for your help

 

[seco services]

 

[Steady]

It won't be cheap!

Why don't you just get a 3/8" Fluidmaster available from most decenrt merchants?

 

[goonerman]

Too late !! Just ordered one...£25!!!!!! Rip off!