2 Gang Switch

[F1903]

Hi,

I have a 2 Gang switch, left hand side switch is 2 way and is working fine, it has a 2 core and earth (strapper) cable coming in, Black to 1 and Red to 2.

Then another cable (feed) coming in and going to Com then looping to the right hand side Com. The incoming feed is just a single core and earth, no neutral.

The right hand side is just a one way switch so I also have a 2 core and earth coming from my pendant. Because the feed cable is only a single core and earth I have no way of looping my neutral to the pendant.

Any idea how I can overcome this? Basically I need to get a neutral to the switch?

Thanks

 

[pete01]

Why do you want a neutral at the switch?

 

[Murdochcat]

Photos ?

 

[F1903]

Why do you want a neutral at the switch?

What do I connect my neutral of my switch wire to? How do I carry it up to the pendant?

 

[Murdochcat]

What do I connect my neutral of my switch wire to? How do I carry it up to the pendant?

From what you describe you don’t have a neutral - the blue is almost certainly the switched live

Hence photos would help