Hi,
Firstly a basic question. I have a concealed shower mixer valve to install that has 3/4 inch female connections. What is the correct method of connecting the supplies and shower / bath filler outlets. I assumed threaded male connector with PTFE tape, but not sure. I have done many soldered and compression type joints in the past but never one of these.
Secondly, I am removing the taps from my bath in favour of a filler via the above valve. Are there blanking caps that can be bought to cover the tap holes in the bath. The bath is plastic.
Many thanks for your help.
Firstly a basic question. I have a concealed shower mixer valve to install that has 3/4 inch female connections. What is the correct method of connecting the supplies and shower / bath filler outlets. I assumed threaded male connector with PTFE tape, but not sure. I have done many soldered and compression type joints in the past but never one of these.
Secondly, I am removing the taps from my bath in favour of a filler via the above valve. Are there blanking caps that can be bought to cover the tap holes in the bath. The bath is plastic.
Many thanks for your help.
