35mm doors - will 100mm x 76mm hinges fit?

[DaveFix]

I'm about to fit new doors which are 35mm thick.

I like the chunky appearance of some firedoor hinges which are 100mm x 76mm.

Will these hinges fit a 35mm thick door - or be too big?

 

[yartin]

I have 40mm door with 100x76 hinge and all good for the last 17 years since fitted.

 

[conny]

I'm about to fit new doors which are 35mm thick.

I like the chunky appearance of some firedoor hinges which are 100mm x 76mm.

Will these hinges fit a 35mm thick door - or be too big?

Easiest way would be to hold a set up against the door and see how they look. Also against the door frame position, in case they are a mill or 2 too wide.

On a side note, looking at your profile pic, do you live in or near Lavenham in Suffolk?

 

[DaveFix]

Easiest way would be to hold a set up against the door and see how they look. Also against the door frame position, in case they are a mill or 2 too wide.

I accept the easiest way to check would be to hold them there and look at them but these are hinges I was going to order online.

On a side note, looking at your profile pic, do you live in or near Lavenham in Suffolk?

I don't live there - but yes you're right the photo is of a house in Lavenham.

 

[freddiemercurystwin]

They should do in theory:

 

[conny]

I don't live there - but yes you're right the photo is of a house in Lavenham.

Thought it was. I live about 2 1/2 miles away and have to go through there to get to places like Sudbury and Great Waldingfield.

 

[DaveFix]

Thanks for the image Freddie. That means I should get at least 4mm spare, so the hinge plates won't be seen from the front of the door.