4m long Aluminium Transition Strip? [Laminate to Carpet]

[EzioSuffolk]

Firstly, I'm struggling to find such a transition strip. I really hadn't wanted to butt shorter strips together. Does such a product exist?

Secondly, the 10mm laminate floor I've installed is intended to be 'floating', and gaps have been left around all the edges (with skirting installed later). How should closely should the laminate butt up to the threshold strip? I'm assuming a gap of a few mm will suffice here? I'm also hoping that I can push the strip down (not tightly, but fully) over the laminate so that dirt / dust doesn't accumulate under it, but at the same time the laminate can still expand and shrink a little without being 'pinned' by the strip.


Thanks for any expert advice.

 

[crazydaze]

If it's on the end of the boards there's not so much expansion on the length of the boards so it can be a little tighter, if it's on the width then you'll need to allow as much as you can.

I am not aware of any manufacturers of 4m long transitions, I think CAT max out at 2.7m as do Stairrods UK with their metal nosings (we use their Doublez profiles adapted to Z profiles quite a bit), lots of Laminate suppliers are reducing their lengths which makes things more awkward still.

We have run the main profile in the center before to push the join pieces to the outside edges.

Treadplates UK may be able to put something together for you, I'm not sure if they can go as long as 4m though.

 

[foxhole]

Any good?

https://www.amazon.co.uk/Laminate-Flooring-Threshold-Transition-Adhesive/dp/B0BFHT9M9K/ref=asc_df_B0BFHT9M9K/?tag=googshopuk-21&linkCode=df0&hvadid=606912216206&hvpos=&hvnetw=g&hvrand=11329720763438679503&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1006815&hvtargid=pla-1879691287173&psc=1&mcid=fef4940aa2da3e97a11b124f51e41125

 

[crazydaze]

That isn’t suitable for Laminate to Carpet Transition.

 

[EzioSuffolk]

Thanks crazydaze - very helpful pointers and tips.

 

[crazydaze]

Thanks crazydaze - very helpful pointers and tips.

As per Foxhole's post, if the company that supplies that cover plate can supply a right angle edge profile to fit the carpet against in 4m long, that may work for you.

 

[dazlight]

Gap plastics do 5m long trims which I’ve used a few times on long bi folds