Accenta alarm

[andy1494]

hi there need some help or adivise, i have installed at home an old accenta alarm what version it is i dont no there no marking on it, what i am asking if possible the keypad has never worked, i taken all 6 wires when out of the blue the alarm went of, can i replace first the keypad with a normal accenta one + can i replace the old alarm box out side with a new one as when the alarm went off i pulled the wires out plus the box shatterd with old age any help please with this tia

 

[Alarm]

I think the RKP can be swapped about. As long as its the LED one.
Yes any other sounder can be used outside, just follow the correct connections.

 

[andy1494]

I think the RKP can be swapped about. As long as its the LED one.
Yes any other sounder can be used outside, just follow the correct connections.

hate to sound thick my keypad is just buttons on it

 

[Alarm]

I think the RKP can be swapped about. As long as its the LED one.
Yes any other sounder can be used outside, just follow the correct connections.

hate to sound thick my keypad is just buttons on it

Not LED segments, LED lights by the side.

If there are none then,

As long as its the LED one

Comes into effect.

 

[andy1494]

I think the RKP can be swapped about. As long as its the LED one.
Yes any other sounder can be used outside, just follow the correct connections.

hate to sound thick my keypad is just buttons on it

Not LED segments, LED lights by the side.

If there are none then,

As long as its the LED one

Comes into effect.

there is about 12 small light to the lh side ie zone on the rh is about 15 buttons

 

[Alarm]

Then has LED`s.
So yes you can swap it for the slightly newer one.

 

[andy1494]

Then has LED`s.
So yes you can swap it for the slightly newer one.

thanks for that will have a shop round now thanks again

 

[andy1494]

Then has LED`s.
So yes you can swap it for the slightly newer one.

thanks for that will have a shop round now thanks again

hi there i have manage to swap the keypad, but i am lost with the new bellbox i just purchased an honeywell AG6 sounder & strobe but the connection on it are as follows =

ST
R
SW
V+
V-

looking at my old box the connection are as follows

ST + blue
ST - Green
SCB red = t
SCB Black a
BELL + yellow
BELL - White
and a red 13v black -

i am know lost how to wire this new box any help please tia