Air lock to complete CH system.

[Dodgyheating]

Having taken action on a suspected air lock and bled the radiator system all radiators have now turned stone cold and refuse to warm up at all.

Not being a DIY expert I am at a complete loss what to do.

There appears to be no air at all in any of the radiators but the pressure gauge is only reading 1 bar............and still no warmth.

Can anyone please offer any advice?

Thanks in advance.

 

[corgiman]

Go on gisssus a clue

what boiler do you have

 

[Dodgyheating]

Apologies, as you can probably tell, I couldn't find my arse with both hands when it comes to plumbing!!

It's a pressurised system with a hot water tank.......(not combi).

The boiler is an Ideal Classic FF350 if that is of any use but the hot water appears to be fine, just the central heating that is causing issues.

I've tried reversing my attempts but I really didn't do much other than attempt to get more pressure to force the airlock.......that seemed to have failed but I'm now sat here in a cold house in -3 temperatures in Leeds!! ha ha

I appreciate your help so far!!

 

[corgiman]

Do you know where the filling loop is?

 

[twgas]

check mv is opening when ch is turned on