aquatron 1 shower front cover

[monkey1962]

hi all this my first post and im looking for help, i have an aquatronic 1 shower and have blown the pressure release device, so i need to replace the pressure release thing, now here is my problem, i cant see a way to get the front off the shower, the front cover has no screws or no visable way it comes off, im stumped, it must come off so i asume, can anyone help me please.
its driving me mad, its an easy fix if i can get the front off please help

steve

 

[denso13]

aquatronic 1 shower

Is this it? https://www.showerspares.com/downloads/triton_aquatronic_1_aquatronic_1.pdf

 

[monkey1962]

Thanks denso, having read through it and it’s the right shower it still mentions screws to undo on the front of the box cover and I can assure you there are no screws to undo so I’m a lot further on but still got the screw problem

 

[denso13]

Does the handle pull off to reveal anything?

 

[dilalio]

Photos would be useful.

 

[dilalio]

Thanks denso, having read through it and it’s the right shower it still mentions screws to undo on the front of the box cover and I can assure you there are no screws to undo so I’m a lot further on but still got the screw problem

Page 3 of the PDF... Look at No.6 in the legend. There are 2 x cover fixings... From the top and bottom.

 

[monkey1962]

I think I’ve cracked it,found 1 screw locating the second and it should be plain sailing from there,thanks so much guys. I have a few mental health problems and was going off my nutt trying to figure this out , thanks denso for those instructions they were invaluable


Steve