Ariston Margherita A1435

[Ollie9]

Please help, my Ariston will not fill with water as expected. Has been working fine for 4 years and has now just stopped filling after successive washes. Can anyone advise?? All water joints are ok and filter is clean.

 

[breezer]

probably the fill valve

will it fill for say a 60 degree wash

 

[Ollie9]

Hello. No, it will not fill at all. I have switched it off for half an hour as it has been going for a while, I will then count the flashes on the indicator? Will this give us more clues?

 

[Ollie9]

Seems to flash 3 tmes.

 

[breezer]

seeing as you hav it and i don't what does the manual say this means?

if no manual try googleing for one

 

[Ollie9]

I'm not sure what three flashes means, I saw a previous post that said it can give a clue. There is no hot OR cold water coming into the machine. And if I try to put it on spin it just rotates the controller.

 

[breezer]

I'm not sure what three flashes means, I saw a previous post that said it can give a clue. There is no hot OR cold water coming into the machine. And if I try to put it on spin it just rotates the controller.

seeing as you have it and i don't what does the manual say this means?

if no manual try googleing for one

 

[Ollie9]

The handbook/manual that comes with the M/C says nothing about flashing light as being a fault error code. Sorry

 

[tiredengineer]

All the fault codes won't be in the manual. Indesit don't give out information freely, even to the trade.
3 flashes indicate a problem with the temperature sensor and/or associated circuit.



Unplug your appliance before working on it

 

[Ollie9]

Hello again!

I've cleaned out the filters and checked the water supply and pressure.all ok. Switched on again...no change. Having read the book again this am, I reset the m/c using the BLACK dot which seemed to do the trick!

The m/c started and filled and completed a No.8 wash cycle then just sat still on the conditioner soak! AAAARrrrrrrgggggghhhhhhh!

HELP!