- Joined
- 9 Apr 2006
- Messages
- 6
- Reaction score
- 0
- Country
Hi folks nice to be here, If there is a place to introduce myself I will do so in a moment.
The problem:
Recently it seems that on program 2,4,6 the dishes were not getting clean
what was happening was the dial instead of slowly going round after the prewash was spinning quickly so 5 mins later the cycle had finished, and needless to say dishes were not clean.
On selecting 3,5,7 all worked well for a week now it is doing the same
Because of this I have no idea whether it's the microprocessor, the heating element, water inlet valve etc etc
appreciate input ta
model is Beko D3731FS
I have a neighbour that used to work as maintenance engineer for Indesit so any advice given concerning part replacement can be carried out correctly and safely.
The problem:
Recently it seems that on program 2,4,6 the dishes were not getting clean
what was happening was the dial instead of slowly going round after the prewash was spinning quickly so 5 mins later the cycle had finished, and needless to say dishes were not clean.
On selecting 3,5,7 all worked well for a week now it is doing the same
Because of this I have no idea whether it's the microprocessor, the heating element, water inlet valve etc etc
appreciate input ta
model is Beko D3731FS
I have a neighbour that used to work as maintenance engineer for Indesit so any advice given concerning part replacement can be carried out correctly and safely.