Beko Heat Pump Tumble Dryer DPHR8PB561 (not working) (Ed.)

[rbranco]

Ive acquired this dryer as not working and was trying to see if I can get it running.

- compressor runs
- compressor gets hot
- gas pressure sensor seems to work, if I disconnect it will never start the compressor
- airstream NTC seems to be correct and measuring 14k ish
- ive cleaned the coils after pulling the unit all apart
- no error codes
- it will jump down the time then just keep running

I find it odd that the compressor gets hot but no drying is happening, its as if there is a blockage in the pipes rather than the compressor not working.

Any ideas?

 

[twixx]

Drain pump?

I’m no expert, it may not even have a drain pump. But my dryer recently had an issue when it couldn’t get rid of the excess water/heat.

 

[rbranco]

Drain pump?

I’m no expert, it may not even have a drain pump. But my dryer recently had an issue when it couldn’t get rid of the excess water/heat.

There is no water in the drain.

The compressor is starting, but it's not warming up.