Belling 930 Farmhose electric cooker

[GARYF123]

Hi, can anyone please advise me?

I have a Belling Farmhouse 930 range cooker that as gone on the blink. It needs 3 new energy regulators, The ones that were originally fitted are no longer available. The part No. is 31ER14MHT (Diamond H). The replacements i have got are Qualtex CS61.

The terminals on the original one were:

S
4
P1
P2
2

The terminals on new one are:

P1
2
P2
PILOT
4

Can anybody advise how to connect new unit up please?

Regards,

Gary.

 

[jj4091]

The obvious answer would be s= pilot, but that is a strange marking for an electric cooker. You will need to resistance check the contacts to confirm they are both the same, unless that is not possible because the old one is open-circuit. Is this what you have? http://www.espares.co.uk/part/cooke...92/154/0/0/141911/grill-energy-regulator.html Are the terminals of the new one layed out in a similar fashion to the old one or are they completely different?

 

[assuhors]

P1 on old to P1 on new
S on old to P2 on new
2 on old to 2 on new
P2 on old to 4A on new
also fit link wire between 4&P1 on new